Table of Contents
Advertisement
Previous view
4
RECEIVING AND TRANSMITTING
Split Lock function
The Split Lock function is convenient for changing
only the transmit frequency but not changing the
receive frequency.
1. Turn ON the Split Lock function.
» SET > Function > SPLIT > SPLIT LOCK
MENU
2. Turn ON the Split function.
3. Hold down
for 1 second to turn ON the Dial
SPEECH
Lock function.
4. While holding down
frequency.
Setting the transmit filter width
The transmit filter width for the SSB and SSB-D mode
can be set. Only for the SSB mode, WIDE (wide), MID
(middle) or NAR (narrow) can be selected.
To change the filter width in the SSB mode:
1. Set the operating mode to USB or LSB mode.
2. Push
.
FUNCTION
• Opens the FUNCTION screen.
3. Touch [TBW].
L Touching [TBW] sets the filter width to WIDE, MID or
NAR.
FUNCTION screen (SSB mode)
The transmit filter widths are set to the following
values by default.
• SSB (WIDE): 100 Hz to 2900 Hz
• SSB (MID):
300 Hz to 2700 Hz
• SSB (NAR): 500 Hz to 2500 Hz
• SSB-D:
300 Hz to 2700 Hz
L You can change the filter width values in the following
settings. (p. 12-3)
»
SET > Tone Control/TBW > TX > SSB > TBW (WIDE)
MENU
»
SET > Tone Control/TBW > TX > SSB > TBW (MID)
MENU
»
SET > Tone Control/TBW > TX > SSB > TBW (NAR)
MENU
»
SET > Tone Control/TBW > TX > SSB-D > TBW
MENU
, set the transmit
XFC
Displayed
when Dial
Lock is ON.
Operating CW
D Setting the CW pitch control
You can set the received CW audio pitch and the CW
side tone to suit your preference without changing the
operating frequency.
1. Select the CW mode.
2. Display the Multi-function menu.
3. Touch [CW PITCH].
4. Set the CW pitch to between 300 and 900 Hz
4-14
Push
Rotate
Push
Advertisement
Chapters
Table of Contents
