Table of Contents
Advertisement
Previous view
4
RECEIVING AND TRANSMITTING
FM repeater operation (Continued)
D Checking the repeater input signal
You can check whether you can directly receive
another station's transmit signal or not, by listening to
the repeater input frequency.
While receiving, hold down
to listen the repeater input
XFC
frequency.
Tone squelch operation
The Tone squelch opens only when you receive a
signal that includes a matching subaudible tone in the
FM mode. You can silently wait for calls from other
stations using the same tone.
When you transmit, the tone frequency is
superimposed on your own signal.
1. Select the desired operating band.
(Example: 28 MHz)
2. Select the FM mode.
3. Rotate
to set the operating frequency.
MAIN DIAL
(Example: 29.550.00 MHz)
4. Push
.
FUNCTION
• Opens the FUNCTION screen.
5. Touch [TONE] several times to select the Tone
squelch mode.
• "TSQL" is displayed.
L Touching [TONE] selects "TONE," "TSQL" or OFF.
FUNCTION screen (FM mode)
While holding down
4-30
Split function ON
While holding
down
XFC
.
Another station's transmit frequency
6. Touch [TONE] again for 1 second.
• Opens the TONE FREQUENCY screen.
7. Rotate
to set the tone frequency.
MAIN DIAL
TONE FREQUENCY screen
• Selectable tone frequencies
67.0
88.5
114.8 151.4 177.3 203.5 250.3
69.3
91.5
118.8 156.7 179.9 206.5 254.1
71.9
94.8
123.0 159.8 183.5 210.7
74.4
97.4
127.3 162.2 186.2 218.1
77.0
100.0 131.8 165.5 189.9 225.7
79.7
103.5 136.5 167.9 192.8 229.1
82.5
107.2 141.3 171.3 196.6 233.6
85.4
110.9 146.2 173.8 199.5 241.8
Checking another station's tone frequency
You can check another station's tone frequency by
tone scanning while the station is transmitting.
1. Touch [T-SCAN].
• The scan starts, and then stops when the matching
tone frequency as another station is received.
Blinks
while
scanning
2. To close the TONE FREQUENCY screen, push
.
EXIT
Release
XFC
.
Frequency offset
Touch for 1
second to
reset to the
default.
Advertisement
Chapters
Table of Contents
