Split Lock Function; Setting The Transmit Filter Width; Operating Cw; D Setting The Cw Pitch Control - Icom IC-7300 Basic Manual
Hide thumbs
Also See for IC-7300:
- Full manual (173 pages) ,
- Service manual (76 pages) ,
- Basic manual (72 pages)
Table of Contents
Advertisement
SplitLockfunction
The Split Lock function is convenient for changing
only the transmit frequency but not changing the
receive frequency.
1. Turn ON the Split Lock function.
» SET > Function > SPLIT > SPLIT LOCK
MENU
2. Turn ON the Split function.
3. Hold down
SPEECH
for 1 second to turn ON the Dial
Lock function.
4. While holding down
XFC
frequency.
Settingthetransmitfilterwidth
YoucanselectthetransmitfilterwidthfortheSSB
mode to WIDE (wide), MID (middle) or NAR (narrow).
1. S ettheoperatingmodetoUSBorLSB.
2. Push
.
FUNCTION
• Opens the FUNCTION screen.
3. Touch[TBW].
L T ouching[TBW]setsthefilterwidthtoWIDE,MIDor
NAR.
FUNCTIONscreen(SSBmode)
L T hetransmitfilterwidthsaresettothefollowing
values by default.
• WIDE: 100 Hz to 2900 Hz
• MID:
300 Hz to 2700 Hz
• NAR:
500 Hz to 2500 Hz
Y oucanchangethefilterwidthvaluesinthe
following settings. (p. 8-2)
»
SET>ToneControl>TX>SSB>TBW(WIDE)
MENU
»
SET>ToneControl>TX>SSB>TBW(MID)
MENU
»
SET>ToneControl>TX>SSB>TBW(NAR)
MENU
, set the transmit
Displayed
when Dial
Lock is ON.
RECEIVING AND TRANSMITTING
Operating CW
D Setting the CW pitch control
You can set the received CW audio pitch and the CW
side tone to suit your preference without changing the
operating frequency.
1. Select the CW mode.
2. Display the Multi-function menu.
3. Touch [CW PITCH].
4. Set the CW pitch to between 300 and 900 Hz
4-11
4
1
2
3
4
Push
5
6
7
8
9
10
11
Rotate
12
13
Push
14
15
16
17
18
19
20
21
Hide quick links:
Advertisement
Table of Contents
