Icom IC-7300 HF Plus Full Manual page 120

Previous view
12
SET MODE
Function (Continued)
TX Delmy HF
TX Delmy 50M
TX Delmy 70M*
Sets the TX delay time on the HF, 50 or 70 MHz band.
• Options: OFF, 10ms, 15ms, 20ms, 25ms, or 30ms
L If an external equipment's rise time is slower than
that of the IC-7300, a reflected wave is produced
and it may damage the IC-7300. To prevent this, set
the appropriate delay time so that no reflected wave
is produced.
LSelect "OFF" for no rise speed.
* Depending on the transceiver's version, this item may not
be displayed.
Time-Out Timer (CI-V)
Sets the Time-out Timer for CI-V operation.
This setting is valid only transmitting initiated by a
CI-V command or pushing
• Options: OFF, 3, 5, 10, 20 or 30 minutes
LSelect "OFF" for no time limit.
Quick SPLIT
Turns the Quick Split function ON or OFF.
• OFF: Turns OFF the function.
• ON: Turns ON the function.
FM SPLIT Onnset (HF)
FM SPLIT Onnset (50M)
Sets the frequency offset for the Split function in the
FM mode on the HF or 50 MHz band.
• Range: –9.999 ~ +9.999 MHz
SPLIT LOCK
Turns the Split Lock function ON or OFF.
• OFF: Turns OFF the function.
• ON: Turns ON the function.
You can use
MAIN DIAL
frequency while holding down
while the Dial Lock function is ON.
[TUNER] Switch
Selects whether or not to save the internal antenna
tuner's status after pushing
• Manual: The internal antenna tuner's status is saved
on all bands.
• Auto: The internal antenna tuner's status is saved
on each band.
(Default: OFF)
(Default: OFF)
(Default: OFF)
(Default: OFF)
.
TRANSMIT
(Default: ON)
(Default: –0.100 MHz)
(Default: –0.500 MHz)
(Default: OFF)
to adjust the transmit
, even
XFC
(Default: Auto)
on each band.
TUNER
PTT Stmrt
Turns the PTT Start Tuning function ON or OFF.
• OFF: Starts to tune only when
• ON: When
TUNER
frequency is shifted more than 1%, starts to
tune when you push PTT.
<<Preset Memory Clemr>>
Clears the all of the internal antenna tuner preset
points.
RTTY Mmrk Frequency
Selects the RTTY mark frequency.
• Options: 1275, 1615, or 2125 (Hz)
L When the internal RTTY decoder is used, 2125 Hz
is automatically selected.
RTTY Shint Width
Selects the RTTY shift width.
• Options: 170, 200, or 425 (Hz)
L When the internal RTTY decoder is used, 170 Hz is
automatically selected.
RTTY Keying Polmrity
Selects the RTTY keying polarity.
• Normal: Key open/close = Mark/Space
• Reverse: Key open/close = Space/Mark
SPEECH Lmngumge
Selects the speech language.
• English: Speech in English.
• Japanese: Speech in Japanese.
SPEECH Speed
Selects the speech speed.
• Slow: Speech speed is slow.
• Fast: Speech speed is fast.
S-Level SPEECH
Turns the S-meter level announcement ON or OFF.
• OFF: The S-meter level is not announced.
• ON: The S-meter level and frequency are announced.
MODE SPEECH
Turns the operating mode announcement ON or OFF.
• OFF: The operating mode is not announced.
• ON: The operating mode is announced when the
mode is changed.
12-5
(Default: OFF)
is ON.
TUNER
is ON and the operating
(Default: 2125)
(Default: 170)
(Default: Normal)
(Default: English)
(Default: Fast)
(Default: ON)
(Default: OFF)