Recording A Voice Tx Memory; D Recording; D Playing Back - Icom IC-7300 HF Plus Full Manual

Previous view
7
VOICE TX MEMORY OPERATION

Recording a Voice TX memory

You can record up to 8 Voice transmit memories of up
to 1 and a half minutes in each memory.
To transmit recorded content using a Voice TX
memory, first record the desired message, as
described below.
L A user supplied SD card is required to use the Voice
TX memory function.
L You can also transmit the recorded content using an
external keypad (pp. 2-2, 12-8).

D Recording

1. Open the VOICE TX screen in a Voice mode.
L(Voice mode: SSB, AM or FM modes).
» VOICE
MENU
L You can select [VOICE] on the MENU screen only
while in a Voice mode.
2. Touch [REC/SET].
• Opens the REC/SET screen.
3. Touch the "REC" item.
• Opens the VOICE TX RECORD screen.
4. Select the desired Voice memory "T1" ~ "T8."
• Opens the selected Voice memory.
TIP: How to clear the recorded content
Touching the Voice memory for 1 second in step 4
above displays the Quick menu, and then touch
"Clear."
5. Touch
Innormation
L
• You can record up to 1 and a half minutes in each
memory.
• Without holding down [PTT], speak into the
microphone at your normal voice level.
• Previously recorded content is overwritten.
Displays the input audio level
6. Touch
7. To close the VOICE TX screen, push
times.
Rotate
Push

D Playing back

1. Do steps 1 ~ 3 as described to the left to display
the VOICE TX RECORD screen.
2. Rotate
"T1" ~ "T8," and then push
3. Push
L Playback is automatically terminated when all of the
recorded content in the memory is played back.
LTo stop while playing back, touch
4. To close the VOICE TX screen, push
times.
7-2
to start recording.
While Recording
to stop recording.
to select the desired Voice memory
MULTI
MULTI
to start the playback.
Touch to open
the MIC GAIN
adjustment
window
Adjust the Mic
gain so that the
"REC Level"
meter does not
reach 100%
several
EXIT
.
.
several
EXIT