D Adjusting The Output Level - Icom IC-7300 HF Plus Full Manual

Previous view
7
VOICE TX MEMORY OPERATION
Transmitting a Voice TX memory (Continue)

D Adjusting the output level

Adjusts the Transmit voice level.
1. Open the VOICE TX screen in a Voice mode.
L(Voice mode: SSB, AM or FM modes).
» VOICE
MENU
2. Touch [TX LEVEL].
• Opens the "TX LEVEL" window.
3. Touch any desired Voice memory key other than
[T4] or [T8]. ([T1], [ T2], [T3], [T5], [T6] or [T7])
• The transceiver automatically transmits.
L To adjust the Transmit voice level using [T4] or [T8],
reverse steps 2 and 3 .
4. While transmitting, rotate
transmit voice level.
Rotate
L The transceiver automatically returns to receive
when all of the recorded content in the memory is
transmitted.
L Adjusting TX LEVEL too high may result in an over
modulation and transmit signal distortion.
5. To close the VOICE TX screen, push
times.
TIP: How to cancel a Voice TX transmission
• Touch any keys other than [TX LEVEL] on the VOICE
TX screen
• Push , , , or
EXIT V/M
▲
• Touch the frequency's MHz digits or the Memory
channel number
• Turn OFF the transceiver
to adjust the
MAIN DIAL
Touch for 1 second to
reset to the default setting
MAIN DIAL
several
EXIT
▼
7-5