Split Frequency Operation; D Using The Quick Split Function; D Using The Receive And Transmit Frequencies Set To Vfo A And Vfo B - Icom IC-7300 HF Plus Full Manual

Previous view
4
RECEIVING AND TRANSMITTING

Split frequency operation

Split frequency operation enables you to transmit
and receive on different frequencies in the same or
different bands.
Another station
Transmit frequency
21.29000 MHz
Receive frequency
21.31000 MHz

D Using the Quick Split function

The Quick Split function enables you to automatically
equalize the frequency and mode of VFOs to the
displayed VFO, and activate the Split function.
1. Set VFO A's receive frequency and operating
mode.
(Example: 21.29000 MHz in the USB mode)
2. Hold down for 1 second.
SPLIT
• The Quick Split function is turned ON and the VFO A
settings are set to VFO B.
• The VFO B frequency is displayed in the bottom right
corner of the main screen.
3. While holding down
frequency offset between transmit and receive.
The offset between transmit and receive
while holding down
XFC
USB mode
Receive frequency
USB mode
Transmit frequency
Displayed
VFO B
frequency is
displayed
XFC , set the operating
VFO B
.
There are 2 ways to use the Split frequency operation.
• Use the Quick Split function
• Use the receive and transmit frequencies set to VFO
A and VFO B.
My station
VFO A
VFO B
D Using the receive and transmit
frequencies set to VFO A and VFO B
1. Set VFO A's receive frequency and operating
mode.
(Example: 21.29000 MHz in the USB mode)
2. Push to select VFO B, and then set the receive
A/B
frequency and the operating mode.
(Example: 21.31000 MHz in the USB mode)
3. Push
SPLIT
L Pushing
SPLIT
4. Push to return to VFO A.
A/B
LThe Split frequency operation is ready.
4-13
to turn ON the Split function.
turns the Split function ON or OFF.
Displayed
VFO A
frequency is
displayed