Setting The Security Password - Lutron Electronics GRAFIK Eye QSGRN-6PCE Installation And Operation Manual

Diagnostics and Special Settings (continued)

Setting the Security Password

A four-digit password can be set as a security feature to protect the
programming settings on the GRAFIK Eye
1. Enter programming mode
Diagnostics
2. Select "Diagnostics" and press the OK button to
Reset USB
accept.
Password
3. Select "Password" and press the OK button to
accept.
4. Select "Set Password" and press the OK button to
Password
accept.
5. Y ou will be prompted to input a four-digit password.
Set Password
Use the Master buttons to scroll through the
Disable
characters (uppercase letters and numbers 0 through
9 only). The character you are currently changing
in the password will appear underlined on the info
screen. Press OK to select the desired character, and
Password
repeat for the remaining characters.
4 / 4
The info screen will confirm that your setting has been
D
1: ABCD
saved.
6. Exit programming mode.
Saved
QS control unit.
®
®
1 2 3 4 5
Enter Password
4 / 4
1: * * * *
Password
Set Password
Disable
GRAFIK Eye
6
When you re-enter programming mode
after setting your password, you will be
prompted to enter your password. Use
D
the method in Step 5 above to select and
enter each character.
Note: The characters will appear on the
info screen as asterisks.
To disable your password, follow Steps
1 through 4 of "Setting the Security
Password", and select "Disable" on the
Password menu.
QS Control Unit Installation and Operation Guide 60
®
Master
buttons
OK
OK
button