Diagnostics and Special Settings
Enabling/Disabling the Timeclock
The timeclock can be enabled or disabled as desired.
1. Enter programming mode. Use the Master
Timeclock
buttons to select "Timeclock." Press the OK
button to accept.
Monday
Enabled
2. Use the Master buttons to highlight either
"Enabled" or "Disabled". Press the OK
button to accept. The info screen will
confirm that your setting has been saved.
3. Exit programming mode.
Saved
Enabling/Disabling the Backlighting
The backlighting on the info screen can be enabled or disabled as
desired.
1. Enter programming mode and select
Backlighting
"Backlighting". Press the OK button to
accept.
Monday
Enabled
2. Use the Master buttons to highlight either
"Enabled" or "Disabled". Press the OK
button to accept. The info screen will confirm
that your setting has been saved.
3. Exit programming mode.
Saved
®
1
2
3
4
5
Diagnostics
If you are having trouble with your control unit and call
Lutron Technical Support, you may be asked for diagnostic
information about your unit.
Diagnostics
Device SN
Link Info
GRAFIK Eye
6
1. Enter programming mode and
select "Diagnostics". Press the OK
button to accept.
2. Use the Master buttons to highlight
the option that will display the
required information. The info
screen can display the device serial
number, link information, code
version, or USB status. There is
Link info
also an option to reset the USB
connection (do this only if asked to
by Lutron Technical Support).
3. Exit programming mode.
QS Control Unit Installation and Operation Guide 59
®
Master
buttons
OK
OK
button