Labeling A Zone (Optional) - Lutron Electronics GRAFIK Eye QSGRN-6PCE Installation And Operation Manual

Zone Setup

Labeling a Zone (optional)

1. Enter programming mode.
Main menu
2. Use the Master buttons to highlight "Zone setup" and press
CCI Setup
the OK button to accept.
3. Use the Master buttons to highlight "Label" and press the
Zone setup
OK button to accept.
4. Use the Master buttons to change the zone number to your
Zone setup
desired zone. Custom zone labels will appear if previously set.
Press the OK button to accept.
Min level
5. Use the Master buttons to highlight "Custom" and press the
Label
OK button to accept. Or, highlight "Default" to return the zone
label to the default (e.g., Zone 1).
6. Use the Master buttons to scroll through the characters
Label zone
(lowercase and uppercase letters, plus numbers 0 through 9).
The character you are currently changing will be underlined
Zone 2
on the screen. Press OK to select the character you want,
then repeat for all available characters. Choose a space (no
character) and press OK for any remaining characters. Press
the OK button to accept.
Label zone 2
Note: Custom zone labels will always begin with the zone
number and a colon (e.g., 1: Uplights).
Custom
7. The info screen will confirm that your name has been saved.
8. Exit programming mode.
Label zone 2
1 / 11
A
1: A
Saved
®
1 2 3 4 5
GRAFIK Eye
6
QS Control Unit Installation and Operation Guide 20
®
Master
buttons
OK
OK
button