Ir Setup - Lutron Electronics GRAFIK Eye QSGRN-6PCE Installation And Operation Manual

IR Setup

An infrared (IR) remote can directly control the GRAFIK Eye
the infrared receiver on the front of the GRAFIK Eye
LUTRON
GRAFIK Eye QS
®
control unit
An externally powered IR repeater can also be connected to the IR terminals on
the GRAFIK Eye QS control unit to obtain IR remote control. This is useful for
®
LUTRON
integrating third party devices with the GRAFIK Eye
applications.) For a complete list of the GRAFIK Eye
commands, please see www.lutron.com/qs.
IR Terminal
LUTRON
GRAFIK Eye QS
®
control unit
An IR remote can also indirectly control the GRAFIK Eye
QS IR Eye or a Lutron IR receiver wired to a QS Sensor Module (QSM) to control
®
LUTRON
the light level of a specific zone or to act as a scene controller. The QS IR Eye and IR
LUTRON
receivers wired to the QSM must first be associated with the GRAFIK Eye
unit before they will be recognized by a GRAFIK Eye
QS Link
LUTRON
GRAFIK Eye QS
®
control unit
®
QS control unit.
®
IR
Remote
LUTRON
QS control unit (e.g. home theater
®
QS control unit's IR programming
®
LUTRON
Third
Party
Device
QS system.
®
IR
Remote
QS
LUTRON
IR Eye
Through QS IREye
QS control unit through
®
Wired to QSM
LUTRON
IR
Remote
Direct to Gra k Eye
QS control unit through the
®
QS control
®
LUTRON
QS Link
Through QS IREye
LUTRON
GRAFIK Eye QS
®
control unit
GRAFIK Eye QS Control Unit Installation and Operation Guide 40
®
Wired to QSM
Direct to Gra k Eye
Through QS IREye
Wired to QSM
QS Sensor Module
Wired IR
(QSM)
Receiver
Thro
Wir
IR
Remote