Labeling A Zone (Optional) - Lutron Electronics QSGRJ-3P Installation And Operation Manual

Zone Setup (continued)

Labeling a Zone (optional)

1. Enter programming mode.
Main menu
2. Use the Master buttons to highlight "Zone setup" and press
CCI Setup
the "OK" button to accept.
3. Use the Master buttons to highlight "Label" and press the
Zone setup
"OK" button to accept.
4. Use the Master buttons to change the zone number to your
Zone setup
desired zone. Custom zone labels will appear if previously set.
Press the "OK" button to accept.
Min level
5. Use the Master buttons to highlight "Custom" and press the
Label
"OK" button to accept. Or, highlight "Default" to return the
zone label to the default (e.g., Zone 1).
6. Use the Master buttons to scroll through the characters
Label zone
(lowercase and uppercase letters, plus numbers 0 through 9).
The character you are currently changing will be underlined
Zone 2
on the screen. Press OK to select the character you want,
then repeat for all available characters. Choose a space (no
character) and press OK for any remaining characters. Press
the "OK" button to accept.
Label zone 2
Note: Custom zone labels will always begin with the zone
Custom
7. The info screen will confirm that your name has been saved.
8. Exit programming mode.
Label zone 2
1 / 11
A
1: A
Saved
®
number and a colon (e.g., 1: Uplights).
GRAFIK Eye QS Control Unit Installation and Operation Guide 19
®
Master
buttons
OK
"OK"
button