General Safety Instructions - wtw Cond 3300i Operating Manual

Safety
Function and
operating safety
Safe operation
Obligations of the
purchaser
10
2.2

General safety instructions

This instrument is built and inspected according to the relevant guidelines
and norms for electronic measuring instruments (see chapter 7 T
).
DATA
It left the factory in a safe and secure technical condition.
The smooth functioning and operational safety of the measuring instrument
can only be guaranteed if the generally applicable safety measures and the
specific safety instructions in this operating manual are followed during oper-
ation.
The smooth functioning and operational safety of the measuring instrument
can only be guaranteed under the environmental conditions that are specified
in chapter 7 T
ECHNICAL DATA
If the instrument was transported from a cold environment to a warm environ-
ment, the formation of condensate can lead to the faulty functioning of the in-
strument. In this event, wait until the temperature of the instrument reaches
room temperature before putting the instrument back into operation.
If safe operation is no longer possible, the instrument must be taken out of
service and secured against inadvertent operation!
Safe operation is no longer possible if the measuring instrument:
has been damaged in transport
has been stored under adverse conditions for a lengthy period of time
is visibly damaged
no longer operates as described in this manual.
If you are in any doubt, please contact the supplier of the instrument.
The purchaser of the measuring instrument must ensure that the following
laws and guidelines are observed when using dangerous substances:
EEC directives for protective labor legislation
National protective labor legislation
Safety regulations
Safety datasheets of the chemical manufacturers.
.
Cond 3300i/3400i
ECHNICAL
ba75684e02 03/2008