Timer Function (Command) - Lauda PROLINE Kryomats Series Operating Instructions Manual

Proline Kryomats

7.10 Timer function (Command)

Using the timer function, the thermostat can carry out an action at a certain time or after a certain
waiting period. The actions are: switching on the thermostat, entering the standby mode or one of the 5
programs in the programmer.
Command
Pump
Settings
Graph
Clock
Programmer
Interfaces
Control
Limits
Help Menu
Please exercise caution when thermostat is in standby mode. (
A previously activated timer mode could unintentionally start the thermostat again from
the standby mode.
Status
Function
Action
Set Time
Set Date
Help Menu
YAUE0007 / 2/26/2009
Set time
Set date
Timer 1
Timer 2
Format of date
End T T
set
Weekplan
Time absolute
Time relative
End T T
set
Starting up
−
Clock
− Open the device parameter menu via the
soft key
− With the cursor keys continue to:
Clock
− or to
Timer 2
− with the menu
is switched
− The standby key
timer!
fix
− The menu
when an action is executed:
− Similar to an electronic mains timer,
Weekplan
to be carried out each day. The cycle is
repeated after 7 days.
−
Time absolute
on which a once-only action (switching
event) occurs. The time point is set with
Set time
−
Time relative
after which a once-only action occurs.
fix
With Set time
entered. ("Set date" is masked out with
this function selection).
− If the
Weekplan
window only
Weekplan
Timer 1 Timer 2
Menu .
Timer 1 ,
,
Status the selected timer
off or on .
does not stop the
7.5.3)
Function is used to define
enables two switching events
defines a time and a date
and with Set date .
defines a waiting period
up to 99h: 59min can be
is activated, in this
Status , Function
are displayed.
and
71