Info Submenu - Lauda Integral T 1200 Operating Instructions Manual

7.6.3.5

INFO submenu

42
Integral T process thermostats

I. e. pressing the key terminates the programme run. The
final setpoint is retained.

You are at the beginning of the start menu. The
programme can be started from the beginning (segment
01)
( Section 7.6.3.3) or you can exit the menu with END
( Section 7.6.3.2).
Pause:
 With the instruction PAUSE the programme run is stopped
(held) at the current position. The display changes to
CONt.
 You can exit the menu with END in the usual way.
Continue:
 Pressing the key continues the programme at the point
where it has been stopped (held).
 After the supply has been OFF and ON again while the
programme is running, the programme is pause (held), i.e.
it can be continued with CONt.
 In this area the current programme data can be
indicated at any time while the programme is running.
( Section 7.6.3.2).
Starting up
YAWE 0026 / 21/01/2019