Alcatel-Lucent ALE M3 Administrator's Manual page 216

12.13.1 Hoteling Key Configuration
You can configure a line key as Hoteling key to log into the Hotel system.
On the phone, select one programmable key, long press it for 2s, and select Key Type as Hoteling.
The following shows configuration for a Hoteling Key.
<setting id="ProgramKey5Type" value="69"/>
<setting id="ProgramKey5Label" value="Hoteling"/>
12.13.2 Hoteling Configuration Parameters
The following table lists the parameters you can use to configure Hoteling function.
Note: X means account ID. It can be number 1~8 for M3/M5/M7, and 1-20 for M8.
Parameter AccountXHotelingEnable
It enables or disables the hoteling feature for account.
Description
Note: It works only if "AccountXServerType" is set to 6 (Broadsoft).
false - disable
Permitted
Values
true - enable
Default false
Parameter AccountXHotelingUserId
Description It configures the user ID used to log into the guest profile.
Permitted
strings
Values
Default Blank
Parameter AccountXHotelingPwd
It configures the password used to log into the guest for account.
Description
Note: It works only if "AccountXServerType" is set to 6 (Broadsoft).
Permitted
String within 99 characters
Values
Default Blank
ALE M3-M5-M7-M8 DeskPhones Administrator Guide
config.xml
config.xml
config.xml
216