Alcatel-Lucent ALE M3 Administrator's Manual page 189

If you change this parameter, the IP phone will reboot for the change to take effect.
Note: This configuration is not available for the M8 Phone.
12.1.3 AudioHub Programmable Key Configuration Parameters
The following table lists the parameters you can use to configure the AudioHub programmable key.
Parameter UsbAMode
It configures the USB-A mode. It can be set to Host which can plugin audio accessories
such as USB headset and USB external handsfree or set to Audio Hub which can be
Description
regarded as PC's sound equipment.
Note: This configuration is not available for the M8 Phone.
Permitted 0 - Host
Values 1 - Audio Hub
Default 0
Menu → Basic Setting → USB
Phone UI
Parameter UsbCMode
It configures the USB-C mode. It can be set to Host which can plugin audio accessories
Description such as USB headset and USB external handsfree or set to Audio Hub which can be
regarded as PC's sound equipment.
Permitted 0 - Host
Values 1 - Audio Hub
Default 1
Menu → Basic Setting → USB
Phone UI
Parameter ProgramKeyXType
It configures the programmable key type. X can be number 1~20 for M3 or 1~28 for
Description
M5/M7 and 1~36 for M8.
Permitted
23 - AudioHub
Values
Default 0
Phone UI Select one program key, then long press it for 2s, and select Key Type as Audio Hub.
ALE M3-M5-M7-M8 DeskPhones Administrator Guide
config.xml
config.xml
config.xml
189