Alcatel-Lucent ALE M3 Administrator's Manual page 157

Permitted
IP_DOMAIN
Values
Default 0.pool.ntp.org
Settings → Time & Date → SNTP Address
Web UI
Parameter SettingSntpServer2
It configures the IP address or the domain name of the NTP server2.
Description
The IP phone will obtain the current time and date from the NTP server2
Permitted
IP_DOMAIN
Values
Default time.nist.gov
Settings → Time & Date → SNTP Secondary Address
Web UI
Parameter SettingSntpRefreshPeriod
It configures the interval (in seconds) at which the phone updates time and date from the
Description
NTP server.
Permitted
NUMERIC[0,*]
Values
Default 3600
Settings → Time & Date → SNTP Refresh Period
Web UI
11.6.3 DST Settings
You can set DST for the desired area as required. By default, the DST is disabled. If set to Automatic, it can
be adjusted automatically from the current time zone setting. The time zone and corresponding DST pre-
configurations exist in the AutoDST file. If the DST is set to Automatic, the IP phone obtains the DST
configuration from the AutoDST file.
11.6.3.1 DST Configuration
The following table lists the parameters you can use to configure DST.
Parameter SettingDstEnable
Description It configures the Daylight Saving Time (DST) feature.
0 - Disabled
1 - Enabled
Permitted
Values 2 - Automatic
Default 0
Settings → Time & Date → DST Enable
Web UI
Parameter SettingTimeZoneLocation
It configures the Daylight Saving Time (DST) Location.
Description
Note: It works only if "SettingDstEnable" is set to 2 (Automatic).
Permitted
Strings - country or area name
Values
Default Universal
ALE M3-M5-M7-M8 DeskPhones Administrator Guide
config.xml
config.xml
config.xml
config.xml
157