Alcatel-Lucent ALE M3 Administrator's Manual page 10

Table of Contents

Advertisement

It configures the secondary IPv4 DNS server.
Note: It works only if "DeviceNetworkIpStackMode" is set to IPv4, and
Description
"DeviceNetworkDhcpMode " is set to Static.
Permitted
IPv4 Address
Values
Default
Blank
Network → IP parameters → DNS2
Web UI
Menu → Advanced (default password: 123456) Setting → Network → IP Config → IPv4
Phone UI
Settings → DNS2
Note: If you change this parameter, the IP phone will reboot for the change to take effect.
2.1.3 IPv6 Configuration
To configure the network settings on the phone for an IPv6 network, you can set up an IP address for the
phone by using SLAAC (ICMPv6), DHCPv6 or by manually entering an IP address. Ensure that your network
environment supports IPv6. Contact your ISP for more information.
When you enable both SLAAC and DHCPv6 on the phone, the server can specify the IP phone to obtain the
IPv6 address and other network settings either from SLAAC or from DHCPv6. If the SLAAC server is not
working, the IP phone will try to obtain the IPv6 address and other network settings via DHCPv6.
The following table lists the parameters you can use to configure IPv6.
Parameter
DeviceNetworkIpv6DhcpMode
It configures the Internet port type for IPv6.
Description
Note: It works only if "DeviceNetworkIpStackMode" is set to IPv6.
Static
Permitted
Values
Dynamic
Default
Dynamic
Menu → Advanced (default password: 123456) Setting → Network → IP Config → IPv6
Phone UI
Settings → IPv6 Mode
Network → IP Parameters → IPv6 → DHCP Mode
Web UI
Note: Only the M8 phone supports the IPv6 configuration in phone web.
Parameter
DeviceNetworkIpv6Address
It configures the IPv6 address.
Note: It works only if "DeviceNetworkIpStackMode" is set to IPv6, and
Description
"DeviceNetworkIpv6DhcpMode " is set to Static.
Permitted
IPv6 Address
Values
Default
::
Menu → Advanced (default password: 123456) Setting → Network → IP Config → IPv6
Phone UI
Settings → IP
Network → IP Parameters → IPv6 → IP Address
Web UI
Note: Only the M8 phone supports the IPv6 configuration in phone web.
Parameter
DeviceNetworkIpv6PrefixLen
ALE M3-M5-M7-M8 DeskPhones Administrator Guide
config.xml
config.xml
config.xml
10

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ale m5Ale m7Ale m8

Table of Contents