Phone Provisioning; Web User Interface - Alcatel-Lucent ALE M3 Administrator's Manual

3. Phone Provisioning

This chapter provides basic instructions for setting up your IP phones with a provisioning server.
The M3/M5/M7/M8 phones support the download of configuration files and binary files using TFTP, HTTP
and HTTPS protocols.

3.1 Web User Interface

You can configure IP phones via web user interface, a web-based interface that is especially useful for
remote configuration.
Because features and configurations vary by phone models and firmware versions, options available on
each page of the web user interface can vary as well. Note that the features configured via web user
interface are limited. Therefore, you can use the web user interface in conjunction with a central provisioning
method and phone user interface.
When configuring IP phones via web user interface, you are required to enter a user name and password for
access.
The default username/password is admin/123456.
3.1.1 Accessing the Web User Interface
Procedures:
•
Step 1: Find the ALE Myriad Series phone's IP address. Press the OK key when the phone is idle.
•
Step 2: Enter the IP address in the address bar of a web browser on your PC.
For example, for IPv4: https://192.168.0.10; for IPv6: https://[2005:1:1:1:215:65ff:fe64:6e0a]
•
Step 3: Enter the user name and password.
•
Step 4: Click Login.
3.1.2 Navigating the Web User Interface
When you log into the web user interface successfully, the phone status is displayed on the first page of the
web user interface. You can click the navigation bar to customize or click Log Out to log out of the web user
interface.
The following shows an example of navigating to Setting → General:
ALE M3-M5-M7-M8 DeskPhones Administrator Guide 29