Alcatel-Lucent ALE M3 Administrator's Manual page 108

10.13.4 DND in Custom Mode Configuration
The following table lists the parameters you can use to configure DND in Custom mode.
Note: X means account ID. It can be number 1~8 for M3/M5/M7, and 1-20 for M8.
Parameter AccountXDndEnable
It turns on or off the DND feature.
Description
Note: It works only if "FeatureDndMode" is set totrue1 (Custom).
false - disable
Permitted
Values
true - enable: The IP phone will reject incoming calls on all accounts.
Default false
Features → DND → Account ID → Enable DND
Web UI
Menu → Features → DND → Account ID → DND Status
Phone UI
Parameter AccountXDndOnCode
It configures the DND on code to activate the server-side DND feature. The IP phone will
send the DND on code to the server when you activate DND feature on the IP phone.
Description
Note: It works only if "FeatureDndMode" and "FeatureDndEnable2" are both set to 1
(Custom).
Permitted
String within 32 characters
Values
Default Blank
Features → DND → Account ID → On Code
Web UI
Phone UI
Menu → Features → DND → Account ID → On Code
Parameter AccountXDndOffCode
It configures the DND off code to deactivate the server-side DND feature. The IP phone
will send the DND off code to the server when you deactivate DND feature on the IP
Description phone.
Note: It works only if "FeatureDndMode" set to 1 (Custom) and "FeatureDndEnable2" set
to false.
Permitted
String within 32 characters
Values
Default Blank
Features → DND → Account ID → Off Code
Web UI
Phone UI
Menu → Features → DND → Account ID → Off Code
10.13.5 DND Synchronization for Server-side Configuration
DND synchronization feature provides the capability to synchronize the status of the DND features between
the IP phone and the server.
If the DND is activated in Phone mode, the DND status changing locally will be synchronized to registered
default accounts on the server.
ALE M3-M5-M7-M8 DeskPhones Administrator Guide
config.xml
config.xml
config.xml
108