Alcatel-Lucent ALE M3 Administrator's Manual page 134

$call_id
$callerID
$calledNumber
$addon_number
$udisk_number
$usbheadset_number
$vpn_ip
10.26.3 Action URL Configuration
The following table lists the parameters you can use to configure action URL.
Parameter ActionUrlSetupCompleted
Description It configures the action URL the phone sends after startup.
Permitted
URL within 511 characters
Values
Default Blank
Features → Action URL → Setup Completed
Web UI
Parameter ActionUrlRegisterSucceeded
Description It configures the action URL the phone sends after an account is registered.
Permitted
URL within 511 characters
Values
Default Blank
Features → Action URL → Register Succeeded
Web UI
Parameter ActionUrlRegisterFailed
Description It configures the action URL the phone sends after registration fails.
Permitted
URL within 511 characters
Values
Default Blank
Features → Action URL → Register Failed
Web UI
Parameter ActionUrlUnregistered
Description It configures the action URL the phone sends after an account is unregistered.
Permitted
URL within 511 characters
Values
Default Blank
Features → Action URL → Unregistered
Web UI
ALE M3-M5-M7-M8 DeskPhones Administrator Guide
The call-id of the active call.
The display name of the caller when the IP phone receives an incoming
call.
The phone number of the callee when the IP phone places a call.
The number of connected Addon.
The number of connected USB flash drives.
The number of connected USB headset devices.
The phone IP address assigned by the VPN server.
config.xml
config.xml
config.xml
config.xml
134