Alcatel-Lucent ALE M3 Administrator's Manual page 16

It enables or disables the LLDP (Linker Layer Discovery Protocol) feature on the IP
Description
phone.
true - enable
Permitted
Values
false - disable
Default true
Web UI Network
Menu → Advanced Setting (default password: 123456) → Network → LLDP → VLAN
Phone UI
Acquirement
2.4.2 Manual VLAN Configuration
VLAN is disabled on IP phones by default. You can configure VLAN for the Internet port and PC port
manually. Before configuring VLAN on the IP phone, you need to obtain the VLAN ID from your network
administrator.
The following table lists the parameters you can use to configure VLAN manually.
Parameter DeviceNetworkLanVlanEnable
Description It enables or disables the VLAN for the Internet port.
true - enable
Permitted
Values
false - disable
Default false
Web UI Network
Menu → Advanced Setting (default password: 123456) → Network → IP Config → Vlan
Phone UI
→ Vlan Config → Use VLAN
Parameter DeviceNetworkLanVlanNumber
It configures the VLAN ID for the Internet port.
Description
Note: It works only if "DeviceNetworkLanVlanEnable" is set to true.
Permitted
Integer from 0 to 4095
Values
Default 4095
Network → IP Parameters → LAN VLAN Number
Web UI
Menu → Advanced Setting (default password: 123456) → Network → IP Config → Vlan
Phone UI
→ Vlan Config → ID
Parameter DeviceNetworkPcVlanEnable
Description It enables or disables the VLAN for the PC port.
true - enable
Permitted
Values
false - disable
Default false
Web UI Network
Menu → Advanced Setting (default password: 123456) → Network → IP Config → Vlan
Phone UI
→ Data Vlan Config → Use VLAN
ALE M3-M5-M7-M8 DeskPhones Administrator Guide
→ →
LLDP VLAN Acquirement
→ →
IP Parameters LAN VLAN
→ →
IP Parameters PC VLAN
config.xml
config.xml
config.xml
16