Alcatel-Lucent ALE M3 Administrator's Manual page 46

Permitted
String of 3 to 32 characters
Values
Default var
Parameter DeviceSecurityAdminPwd
Description It configures the password of the admin.
Permitted
String of 4 to 32 characters
Values
Default Blank
Maintenance → Change Password
Web UI
Menu → Advanced Setting (default password: 123456) → Change Password
Phone UI
5.1.2 User Access Level Configuration
The following table lists the parameters you can use to configure the user access level.
Parameter DeviceUserAccessPermissionEnable
Description It enables or disables the 3-level access permissions (admin, var, user).
Permitted false - disable
Values true - enable
Default false
Parameter DeviceUserAccessPermissionUrl
Description It configures the access URL of the file, which defines 3-level access permissions.
Permitted
URL within 512 characters
Values
Default Blank
Parameter DeviceDefaultAccessLevel
It configures the default access level to access the phone user interface.
Description
Note: It works only if "DeviceUserAccessPermissionEnable" is set to true (Enabled).
0 - user
Permitted
1 - var
Values
2 - admin
Default 0
5.1.3 Access Permissions Specification
Access permissions of all configuration items available on phones' web user interface and phone user
interface can be defined in a fixed UserAccessPermission.xml file.
Each configuration item in the file is formatted as:
ItemName = X1X2
The valid values of X1, X2 include 0, 1, 2 and 3.
X1 is used for specifying the access level. The access levels: 2 = admin, 1 = var, 0 = user, 3 = none.
X2 is used for defining the access permission. 2 means the configuration item is read-only for X1 and higher
access levels, the highest is always writable. 1 means the configuration item is read- only for X1 access level
ALE M3-M5-M7-M8 DeskPhones Administrator Guide
config.xml
config.xml
config.xml
config.xml
46