Alcatel-Lucent ALE M3 Administrator's Manual page 145

CALLEND
ASW/CANCEL/HOLD/UNHOLD:xxx
AlwaysFwdOn/BusyFwdOn/NoAnswFwdOn
=xxx
AlwaysFwdOff/BusyFwdOff/NoAnswFwdOff
number=xxx&outgoing_uri=y
Autop
screencapture
10.27.4 Action URI Configuration
The following table lists the parameters you can use to configure action URI.
Parameter FeatureActionUriEnable
Description It enables or disables the phone to receive action URI requests.
false - disable
Permitted
Values
true - enable
Default false
Parameter FeatureActionUriPromptEnable
It enables or disables the phone to pop up the Allow Remote Control prompt when
Description
receiving action URI requests.
false - disable
Permitted
Values
true - enable
Default true
Parameter FeatureActionUriLimitIp
It configures server address from which the phone receives the action URI requests.
Multiple addresses are separated by commas. For discontinuous IP addresses, multiple IP
addresses are separated by commas.
Description
For continuous IP addresses, the format likes *.*.*.* and the "*" stands for the values
0~255.
Note: It works only if "FeatureActionUriEnable" is set to true (Enabled).
ALE M3-M5-M7-M8 DeskPhones Administrator Guide
End a call
Answer/end/hold/unhold a call (xxx refers to the call-id of
the active call)
Activate an always/busy/no answer forward feature to xxx
for the IP phone ("xxx" means the destination number)
Deactivate the always/busy/no answer forward feature for
the IP phone
Use y call to xxx
Eg:
https://10.4.0.62/servlet?key=number=1000&outgoing_uri=
1001
Use 1001 call 1000
Perform auto provisioning
Gets the current screen capture
Eg:
https://10.4.0.62/screencapture
https://10.4.0.62/servlet?command=screencapture
If you want to download screen shots
https://10.4.0.62/screencapture/download
config.xml
config.xml
config.xml
145