Download
Share
Print this page
Alcatel-Lucent Halo H3P Administration Manual
  1. Manuals
  2. Brands
  3. Alcatel-Lucent Manuals
  4. Telephone
  5. Halo H3P
  6. Administration manual

Alcatel-Lucent Halo H3P Administration Manual

Hide thumbs

Advertisement

Quick Links

Download this manual
Alcatel Lucent Enterprise Communication Device Business
Web: www.aledevice.com; www.al-enterprise.com
Email: sales.alesip@al-enterprise.com
Copyright @ALE 2020 All Rights Reserved
1

Advertisement

loading
Need help?

Need help?

Do you have a question about the Halo H3P and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Alcatel-Lucent Halo H3P

Summary of Contents for Alcatel-Lucent Halo H3P

  • Page 1 Alcatel Lucent Enterprise Communication Device Business Web: www.aledevice.com; www.al-enterprise.com Email: sales.alesip@al-enterprise.com Copyright @ALE 2020 All Rights Reserved...
  • Page 2 ............................10 ..........................10 ..................10 ................... 11 ......................... 11 ......................... 13 ......................... 14 ..................15 ..................15 ........................16 ........................16 ........................17 ........................17 ........................17 ......................17 ........................17 ................18 .............................. 18 ....................... 18 ....................19 ..........................
  • Page 3 ........................26 ......................26 ....................26 ...................... 27 ........................27 ..........................27 ....................28 ..................... 28 ....28 ..............28 ............................ 29 ..........................29 ............................29 ....................29 ............30 ............................30 ................30 ....................30 ....................31 ...................... 31 ..............
  • Page 4 ......................41 ................. 42 ........................42 ................... 42 ..........................43 ............................. 44 ........................... 44 ............................44 ....................44 ..........................45 ....................45 ........................... 45 ......................45 ......................47 ................47 ................49 ..........................49 ....................49 ..........................50 .................... 50 .............................
  • Page 5 ............................55 ....................55 ....................... 56 ..........................57 ........................57 ......................57 ................. 57 ................. 59 ........................60 ......60 ................60 ....................... 61 ..............62 ..............................62 ..........................62 ........................63 ............................63 ............................64 ................... 64 ..................65 .............................
  • Page 6 ............. 73 ..........................73 .................... 73 ..........................74 10.12.1 ....................74 ......................74 ..................74 ..................75 ................75 ................ 76 ......... 77 ..........................77 ................78 ................ 78 ............78 ............81 ......85 ....................85 ............... 86 ............................ 86 ....................
  • Page 7 ........................92 ........................92 ....................... 93 ..................93 ........................... 94 ....................94 ........................... 95 ..................95 ............95 ......................... 96 ..........................96 ........................98 ......................... 99 ..............101 ................ 101 ........................... 102 ................... 102 ............... 102 ........102 ..........................103 .......................
  • Page 8 ..........................112 ......113 ............... 113 ............113 ............... 114 .............. 114 ............115 ..........................116 ..........116 ..........116 ............................117 ............... 117 .............. 117 ............118 ........................119 ........... 119 ........119 ..........................120 ........120 ......... 120 .........
  • Page 9 ..................128 ......................129 ........................ 129 ......................... 130 .............. 130 Copyright @ALE 2020 All Rights Reserved...
  • Page 10 Halo series phones (H3P/H3G/H6/H3W/H6W) administrator guide provides general guidance on setting up phone network, provisioning and managing phones. This guide is not intended for end users, but for administrators with experience in networking who understand the basis of open SIP networks and VoIP endpoint environments. As an administrator, you can do the following with this guide: ➢...
  • Page 11 The following table lists the parameters you can use to configure IP addressing mode. Parameter LocalEnetcfgIpstack config.<mac>.xml Description It configures the IP addressing mode. Permitted IPv4 Values IPv6 Default IPv4 Phone UI Menu->Advanced (default password: 123456)Setting->Network->IP Stack->IP Stack If you change this parameter, the IP phone will reboot to make the change take effect. The following table lists the parameters you can use to configure IPv4.
  • Page 12 Web UI Network->IP parameters-> Subnet Mask Menu->Advanced (default password: 123456)Setting->Network->IP Config->IPv4 Phone UI Settings-> S/net Parameter LocalEnetcfgRouter config.<mac>.xml It configures the IPv4 default gateway. Example: LocalEnetcfgRouter = 192.168.1.254 Note: It works only if “LocalEnetcfgIpstack” is phone to IPv4, and Description "LocalEnetcfgDhcpMode "...
  • Page 13 If you configure the network Settings on the phone for an IPv6 network, you can phone up an IP address for the phone by using SLAAC (ICMPv6), DHCPv6 or by manually entering an IP address. Ensure that your network environment supports IPv6. Contact your ISP for more information. When you enable both SLAAC and DHCPv6 on the phone, the server can specify the IP phone to obtain the IPv6 address and other network Settings either from SLAAC or from DHCPv6, if the SLAAC server is not working, the IP phone will try to obtain the IPv6 address and other network...
  • Page 14 Note: It works only if “LocalEnetcfgIpstack” is phone to IPv6, and " LocalEnetcfgIpv6Mode " is phone to Static. Permitted Values IPv6 Address Default Blank Menu->Advanced (default password: 123456)Setting->Network->IP Config->IPv4 Phone UI Settings-> Router Parameter DmEnetcfgDns1v6 config.<mac>.xml It configures the primary IPv6 DNS server. Example: DmEnetcfgDns1v6= 3036:1:1:c3c7:c11c:5447:23a6:256 Note: It works only if “LocalEnetcfgIpstack”...
  • Page 15 DHCP Option 133 DHCP Option 100 Support VCI definition The following table lists common DHCP options for IPv4 supported by Halo series phones. Parameters DHCP Option Description Provision URL option 66 Provision URL option 66 Provision URL option 43 ->option 66 Provision URL option 43 ->option 67 DNS server...
  • Page 16 http://172.24.190 http://172.24.19 .161 0.162 http://172.24.190.161 http(s)://172.24.190.16 172.24.190.161 http(s)://172.24.190.16 172.24.190.161 1/provisioning http://172.24.19 172.24.190.161 0.162 http://172.24.190.162 http(s)://provisioning http://172.24.19 0.162 http://172.24.190.162 Note: If user configures a relative path with only IP address or domain name for DHCP option 66/67, the default https protocol will be added to the provisioning URL. Halo series phones support using the NTP server address offered by DHCP.

  • Page 17: Dhcp Option

    In Halo R120 release, the IP phones support to configure DHCP option 132 to define 802.1Q VLAN ID. In Halo R120 release, the IP phones support to configure DHCP option 133 to define 802.1p LAYER 2 Priority for SIP/RTP. In Halo R120 release, the IP phones support to configure DHCP option 100 to define timezone. The format of the POSIX specifier is <name><offset><dst name><dst offset><dstrule>...
  • Page 18 During the startup, the phone will automatically detect the option 17 or option 59 for obtaining the provisioning server address. The priority of obtaining the provisioning server address is as follows: option 17-> option 59. The purpose of VLAN configurations on the IP phone is to insert a tag with VLAN information to the packets generated by the IP phone.
  • Page 19 VLAN is disabled on IP phones by default. You can configure VLAN for the Internet port and PC port manually. Before configuring VLAN on the IP phone, you need to obtain the VLAN ID from your network administrator. The following table lists the parameters you can use to configure VLAN manually. Parameter LocalEnetcfgVlanEnable config.<mac>.xml...
  • Page 20 Wi-Fi feature enables you to connect the phones to the organization’s wireless network. The wireless network is more convenient and cost-effective than the wired network. Wi-Fi feature is applicable to Halo series phones H3W/H6/H6W. When the Wi-Fi feature is enabled, the IP phone will automatically scan the available wireless networks.
  • Page 21 Default Phone UI Advanced Setting->Wi-Fi->Wi-Fi Manager Parameter WIFI[1,5]Password config.<mac>.xml Description Permitted Values Default Phone UI Parameter WIFI[1,5]Priority config.<mac>.xml Description It configures the priority of AP. Permitted Values Default Network Address Translation (NAT) is a function that allows multiple devices to share the same public, routable IP address to establish connections over the Internet.
  • Page 22 Halo series phones support two Ethernet ports: Internet port and PC port. You can enable or disable the PC port on the IP phones. Topics Supported Transmission Methods Internet Port and PC Port Configuration Three optional methods of transmission configuration for IP phone Internet port and PC port : ➢...
  • Page 23 Parameter LocalEthlcfgPcSpeed config.<mac>.xml Description It configures the transmission method of the PC port. Permitted Values Default Web UI Network -> Port-> PC Speed Phone UI Advanced Setting -> Network -> Ethernet -> PC ->PC speed Parameter LocalEthlcfgPcDuplex config.<mac>.xml Description It configures the transmission method of the PC port. Permitted Half Values...
  • Page 24 Halo series phones support the following protocols for 802.1X authentication: ➢ EAP-MD5 ➢ EAP-TLS (requires Device and CA certificates, requires no password) You can configure the 802.1x feature at the path: For Halo series phones at the path, Advanced Settings -> Network -> 802.1x. Copyright @ALE 2020 All Rights Reserved...
  • Page 25 This chapter provides basic instructions for setting up your IP phones with a provisioning server. In Halo R120 release, H3P/H3G/H6/H3W/H6W phones support TFTP, HTTP and HTTPS protocols to download configuration files and binary files. Topics Phone MMI Common configuration file, Device Specific configuration file EDS (Easy Deployment Server) Provisioning Methods You can configure IP phones via web user interface, a web-based interface that is especially useful...
  • Page 26 Phone user interface makes configurations available to users and administrators; but the Advanced/Advanced Settings option is only available to administrators and requires an administrator password (default: admin). Halo series phones support two configuration template files: Common CFG file and MAC-Oriented CFG file.

  • Page 27: Usb Upgrade

    Halo series phones provides two ways to provision your phones: ➢ Manual Provisioning: provisioning via the local phone user interface or web user interface. ➢ Central Provisioning: provisioning through configuration files stored in a central provisioning server. The method you use depends on how many phones need to be deployed and what features and Settings to be configured.
  • Page 28 You can download the latest firmware online. The following table lists the associated and latest firmware name for each IP phone model. IP Phone Model Firmware Name sipH3_6X sipH3_6X sipH3_6X sipH3_6X sipH3_6X Before upgrading firmware, you need to know the following: ➢...
  • Page 29 Procedure: 1. Prepare a moveable USB disk with FAT32 format 2. Create a folder and name it “upgrade” 3. Copy the firmware binary files in upgrade folder 4. Plug U disk into the phone’s USB port 5. Power on the phone 6.
  • Page 30 The following table lists the parameters you can use to configure the administrator password. Parameter DmAdminPasswd config.<mac>.xml Description It configures the password of the administrator. Permitted Values String within 64 characters Default 123456 Web UI Maintenance -> Change Password You can lock the IP phone to prevent it from unauthorized use. Once the IP phone is locked, anyone must enter the password to unlock it.
  • Page 31 Permitted Values [60,18000] Default Web UI Setting -> Phone Lock -> Automatic Lock Time Phone UI Basic Setting -> Display -> Screen saver -> Wait Time Parameter ScreenLockPassword config.<mac>.xml Description It configures screen lock password. Permitted Values Integer Default 0000 Web UI Setting ->...
  • Page 32 ➢ EXP1024-DHE-DSS-RC4-SHA ➢ EXP1024-RC4-SHA ➢ EXP1024-RC4-MD5 ➢ EXP-EDH-RSA-DES-CBC-SHA ➢ EXP-EDH-DSS-DES-CBC-SHA ➢ EXP-DES-CBC-SHA ➢ EXP-RC2-CBC-MD5 ➢ EXP-RC4-MD5 ➢ ECDHE The IP phone can serve as a TLS client or a TLS server. In TLS feature, we use the terms trusted and server certificate. These are also known as CA and device certificates. The TLS requires the following security certificates to perform the TLS handshake: ➢...
  • Page 33 ➢ isrgrootx1.pem ➢ SVRSecureG3.pem ➢ GeoTrust_Primary_CA.pem ➢ Root_R2.pem ➢ sfroot_g2.pem ➢ TCTrustCenterClass3CAII.pem ➢ Root_R1.pem ➢ TCTrustCenterClass4CAII.pem ➢ DigiCertGlobalRootG2.pem ➢ Thawte_Personal_Freemail_CA.pem ➢ BaltimoreCyberTrustRoot.pem ➢ entrust_ev_ca.pem ➢ Thawte_Server_CA.pem ➢ AmazonRootCA2.pem ➢ DigiCertTrustedRootG4.pem ➢ VeriSign_Class_3_Public_Primary_Certification_Authority_G4.pem ➢ DigiCertAssuredIDRootG3.pem ➢ DigiCert_SHA2_Secure_Server_CA.pem ➢ StartComCertificationAuthorityG2.pem ➢ GeoTrust_Universal_CA2.pem ➢...
  • Page 34 Description It configures the type of transport protocol. 0:UDP 1:TCP 2:TLS Permitted 3: DNS-NAPTR, if no server port is given, the IP phone performs the DNS NAPTR and SRV Values queries for the service type and port. Default Web UI Account ->Basic ->...
  • Page 35 The callee receives the INVITE message with the RTP encryption algorithm, and then answers the call by responding with a 200 OK message which carries the negotiated RTP encryption algorithm. Example of the RTP encryption algorithm carried in the SDP of the 200 OK message: m=audio 6000 RTP/SAVP 0 101 a=rtpmap: 0 PCMU/8000 a=rtpmap:101 telephone-event/8000...
  • Page 36 When the phone downloads the common configuration file from the provisioning server, the IP phone can enable or disable the authentication of the server certificate based on the trusted certificates list. Topics HTTPS peer verify configuration The following table lists the parameters you can use to configure the HTTPS peer verify. Parameter HttpVerifyPeer config.<mac>.xml...
  • Page 37 Contacts and groups can be added either one by one, or in batch using a local contact file. Halo series phones support *.xml format contact files, and you can customize the *.xml format contact file. Topics Local Contact File Customization Local Contact Files Upload Example: Adding Contacts Using a Contact File You can download local contact template from the phone Web UI.
  • Page 38 Valid Values: 1~15/1~8; Halo series phones support 8 accounts group_id_name Specify which group the contact adds to. Built-in group: All Contacts, External Directory(Only M7 in Halo series phone support) Custom group: XXX (for example, Friend) default_photo Built-in avatar: Resource: avatar name 1.
  • Page 39 Customize the contact file “contact.xml” and place the contact file “contact.xml” to the provisioning server http://192.168.10.25 Example: PhonebookUrl = http://192.168.10.25/directory.xml During auto provisioning, the IP phone connects to the provisioning server “192.168.10.25”, and downloads the local contact file “directory.xml” .You can view the contacts on their phone, and specify the avatar for a contact.
  • Page 40 surname Last name or family name distinguishedName Unique identifier for each entry Domain component company Office phone number telephoneNumber Company or organization name mobile mobilephoneNumber Mobile or cellular phone number ipPhone IPphoneNumber Home phone number The following table lists the parameters you can use to configure LDAP. Parameter LDAPEnabled config.<mac>.xml...
  • Page 41 Permitted Values String within 99 characters Default blank Web UI Contact Manager -> LDAP -> LDAP User Name Parameter LDAPPassword config.<mac>.xml This password is used in conjunction with the LDAP login, if the LDAP server requires Description authentication. Permitted Values String within 99 characters Default blank...
  • Page 42 The following table lists the parameters you can use to configure directory search settings. Parameter DirectorySearchType config.<mac>.xml It configures the search type when searching the contact in Local Directory or Remote Description Phone Book. Permitted 0: contains Values 1: startwith Default The remote phone book is a centrally maintained phone book, stored on the remote server.
  • Page 43 Description It configures the name of the x group remote phone book, if set, is displayed on MMI. Permitted Values TEXT Default empty Phone UI Directory->Remote Directory Web UI Contact Manager->Remote Phone Book-> Display Name Parameter RemotePhoneBook[1-6]Url config.<mac>.xml It configures the download address of the x group of remote phone book is used to Description download the contact.
  • Page 44 Default Parameter ContactBackupEnable config.<mac>.xml Description It configures to enable or disable contactBackup. Permitted false values true Default false When user never wants to receive calls from somebody, the phone number can be added into the blacklist of directory. Then all calls from the phone number which is included in the blacklist will be refused automatically.
  • Page 45 Parameter DialingToneEnabled config.<mac>.xml Description It enables or disables the dialing tone. Permitted true Values false Default true Web UI Setting -> General -> Dialing Tone Enabled The phone can play a specific dial tone when it has new/unreaded voice messages received. Topics Stutter tone Configuration Parameter...
  • Page 46 /usr/share/ringdata/ring12.wav /usr/share/ringdata/ring13.wav /usr/share/ringdata/ring14.wav /usr/share/ringdata/ring15.wav Default /usr/share/ringdata/ring00.wav Web UI Setting -> Ringing -> Internal Melody Phone UI Basic Setting -> Sound -> Ringing -> Int Melody Parameter AudioRingExternalChoice config.<mac>.xml Description It configures external call ring melody. /usr/share/ringdata/ring00.wav /usr/share/ringdata/ring01.wav /usr/share/ringdata/ring02.wav /usr/share/ringdata/ring03.wav /usr/share/ringdata/ring04.wav /usr/share/ringdata/ring05.wav /usr/share/ringdata/ring06.wav /usr/share/ringdata/ring07.wav...
  • Page 47 Default Web UI Setting -> Ringing -> Beeps Before Ringing Phone UI Basic Setting -> Sound -> Ringing -> Beep The feature of distinctive ring tones allows certain incoming calls to trigger IP phones to play distinctive ring tones. The IP phone inspects the INVITE request for an "Alert-Info" header when receiving an incoming call.
  • Page 48 N<1 or N>15 ring00 Examples: Alert-Info: test/Bellcore-dr1 Alert-Info: Bellcore-dr1 Alert-Info: Bellcore-dr1;x-line-id=1 “ringtone-N/ringtone-RingN” When Alter-Info header contains keyword “MyMolodyN/MyMelodyRingN”,the IP phone will play the corresponding local ring tone (RingN.wav), or play the first local ring tone (Ring1.wav) in about 10 seconds if “N” is greater than 15 or less than Examples: Alert-Info: ringtone-2 Alert-Info: ringtone-Ring2.wav...
  • Page 49 If the INVITE request contains the following type of strings, the IP phone will answer incoming calls automatically without playing the ring tone: ➢ Answer-Mode: Auto ➢ Alert-Info: info = alert-autoanswer ➢ Call-Info: answer-after = 0 (or Call-Info: Answer-After = 0) You can configure the distinctive ring tones by the phone WEB UI.
  • Page 50 Topics Ringer Volume Configuration The following table lists the parameters you can use to configure ringer volume. Parameter AudioRingVolume config.<mac>.xml Description It configures Ring volume level. Permitted Values [0,9] Default Phone UI Basic Setting -> Sound -> Ringing -> level When receiving a message, the IP phone will play a warning tone.
  • Page 51 ➢ 25:Japan The following table lists the parameters you can use to configure tones. Parameter AudioToneCountry config.<mac>.xml Description It configures country standard for call progress tone. 0:UK 1:France 2:Germany 3:Italy 4:Spain 5:Dutch 6:Portugal 7:Canada 8:US 9:Hungary 10:Czec 11:Slovakia 12:Slovenia 13:Estonia 14:Poland 15:Lithuania 16:Latvia...
  • Page 52 PCMA PCMA G.711 RFC 3551 64 Kbps 16 Ksps 20ms a-law PCMU G.711 u-law RFC 3551 64 Kbps 16 Ksps 20ms G729 G729 RFC 3551 8 Kbps 16 Ksps 20ms iLBC_15_2kbps iLBC RFC 3952 15.2 Kbps 8 Ksps 20ms iLBC_13_33kbps iLBC RFC 3952 13.33 Kbps...
  • Page 53 PTime is a measurement of the duration (in milliseconds) of the audio data in each RTP packet sent to the destination, and defines how much network bandwidth is used for the RTP stream transfer. Before establishing a conversation, codec and ptime are negotiated through SIP signaling.
  • Page 54 Gain Control (AGC), Voice Activity Detection (VAD), Comfort Noise Generation (CNG) and jitter buffer. Topics Acoustic Echo Cancellation (AEC) Noise Suppression Background Noise Suppression (BNS) Automatic Gain Control (AGC) Voice Activity Detection (VAD) Comfort Noise Generation (CNG) Jitter Buffer Halo series phones employ advanced AEC for hands-free operation. The AEC feature can remove the echo of the local loudspeaker from the local microphone without removing the near-end speech.
  • Page 55 Comfort Noise Generation (CNG) is used to generate background noise for voice communications during periods of silence in a conversation. Halo series phones support fixed type of jitter buffers. A fixed jitter buffer adds the fixed delay to voice packets. DTMF (Dual Tone Multi-frequency) tone, better known as touch tone.
  • Page 56 0:FollowKey 1:80ms 2:100ms Permitted 3:200ms Values 4:250ms Default Parameter AudioDtmfFeedbackEnable config.<mac>.xml Description It enables or disables DTMF feedback. Permitted true Values false Default true Web UI Setting ->Audio -> Enable DTMF Feedback Parameter AudioDtmfDuration config.<mac>.xml Description It configures Configure the DTMF duration. 0:FollowKey 1:80ms 2:100ms...
  • Page 57 This chapter introduces how to configure the account Settings and register to sip server on Halo series phones. Topics Account Registration Server Redundancy SIP Server Name Resolution Registering an account makes it easier for the IP phones to receive an incoming call or dial an outgoing call.
  • Page 58 Permitted String within 64 characters Values Default Blank Web UI Account->Basic->SIP Label Name Parameter SIPGroupXDisplayName config.<MAC>.xml Description It configures the display name. Permitted String within 64 characters Values Default Blank Web UI Account->Basic->Display Name Phone UI Menu->Advanced Setting->Account->AccountX->Display name Parameter SIPGroupXAuthenticationName config.<MAC>.xml Description...
  • Page 59 Phone UI Menu->Advanced Setting->Account->AccountX->Sip server1 Parameter SIPServerXPort config.<MAC>.xml Description It configures the port of SIP server in which the accountX use to register . Permitted Integer from 0 to 65535 Values Default 5060 Web UI Account->Basic->SIP Server Port Parameter SIPGroupXOutBoundProxyAddress config.<MAC>.xml It configures the IP address or domain name of the outbound proxy Description...
  • Page 60 Permitted false-Disabled Values true-Enabled Default true Parameter SIPGroupXServerType config.<MAC>.xml Description It configures the type of the SIP server. 0-Default 1-OXE Permitted 2-OXO Values 6-Broadsoft 10-Metaswitch Default Web UI Account->Advanced->Server Type Server redundancy is often required in VoIP deployments to ensure continuity of phone service, for example, take the call server offline for maintenance, the server fails, or the connection between the IP phone and the server fails.
  • Page 61 Web UI SIP Features->General->Account Server Failover Enable Parameter SIPServerXFailoverAddress config.<MAC>.xml It configures the IP address or domain name of the secondary server in which the Description accountX is registered. Permitted String within 256 characters Values Default Blank Web UI Account->Basic->Secondary SIP Server Phone UI Menu->Advanced Settings->Account->AccountX->SIP Server2 Parameter...
  • Page 62 performs NAPTR query for the NAPTR pointer and transport protocol (UDP, TCP and TLS), the SRV query on the record returned from the NAPTR for the target domain name and the port number, and the A query for the IP addresses. If an explicit port (except 0) is specified, A query will be performed only.
  • Page 63 The following table lists the parameters you can use to change the call log Settings: Parameter CallHistorySave config.<MAC>.xml It enables or disables the IP phone to save the call log.(missed calls, Description placed calls, received calls) Permitted 0-Not save Values 1-Save all Default This chapter shows you how to configure call features on Halo series phones:...
  • Page 64 Dial plan is a string of characters that governs the way how IP phones process the inputs received from the IP phone’s keypads. You can use the regular expression to define the dial plan. Topics Dial Plan Defined by Dialing Rule Dial Plan Defined by Digit Map Halo series phones support user-defined dialing rules, the parameters you can configure such as Country code, Area code, External Prefix and so on.
  • Page 65 Default Blank Web UI Setting->Dialing Rule->External Prefix Exception Parameter DialingRuleEnableHistoryX config.<MAC>.xml It enables or disables dialing rule works in history Note: It includes: 1. Dial from History tab Description 2. Select a number in dialing screen by right key, which is in provided by Calllog. 3.
  • Page 66 The “x” can be used as a placeholder for any digit from 0 to 9. Example: “10x” would match “101”, “102”, “103”, and so on. The square bracket "[]" can be used as a placeholder for a single character which matches any of a phone of characters.
  • Page 67 The following table lists the parameters you can use to configure hotline. Parameter HotlineNumber config.<MAC>.xml It configures the hotline number that the IP phone automatically dials out when you Description lift the handset, press the loudspeaker key or the account key. Permitted String within 32 characters Values...
  • Page 68 PhoneProgKeyXType=17 Program key Configuration PhoneProgKeyXLabel=Recall Web UI Program Keys ->Program Keys->Type, Label Phone UI Programming key(Long press)->Key Type, Label After the correct configuration, a recall key is available on the phone. When you press the recall key, phone will dial out the number that last call you. Speed dial allows you to speed up dialing the contacts on the phone’s idle screen using dedicated program keys.
  • Page 69 You can configure multiple Speed Dial keys for different contacts which are used frequently or hard to remember. Call timeout defines a specific period of time after which the IP phone will cancel the dialing if the call is not answered. Topic Call Timeout Configuration The following table lists the parameter you can use to configure call timeout.
  • Page 70 Permitted Integer Values Default Web UI Setting ->General -> Auto Dial Out Timer Anonymous call allows the caller to conceal the identity information shown to callee. The callee’s phone LCD screen prompts an incoming call from anonymity, there is no name, number or other information displayed.
  • Page 71 It configures the off code for accountX to deactivate anonymous call feature on server-side. Description Note: The parameter of TelephonyHideIdentityX must phone to false, phone will send the off code to server. Permitted String within 32 characters Values Default Blank Web UI Account->Advanced->Anonymous Call off code Phone UI...
  • Page 72 The IP phone will send the code to deactivate anonymous call rejection feature on server- side when you deactivate it on the IP phone. Example: AnonymousCallRejectionOffCode1 = *87 Permitted Values String within 32 characters Default Black Web UI Account->Advanced-> Anonymous Rejection Off Code Phone UI Menu->Features->Anonymous Reject->Account X Call number filter feature allows IP phone to filter designated characters automatically when...
  • Page 73 Permitted true-enable Values false-disable Default true Web UI SIP Features ->General->Allow IP Call Accept SIP trust server only enables the IP phones to only accept the SIP message from your SIP server and outbound proxy server. It can prevent the phone receiving ghost calls from random numbers.
  • Page 74 Call waiting enables you to receive another call when there is already an active call on your phone. If it is disabled, the new incoming call will be rejected automatically. You can enable call waiting feature and phone the phone to play a warning tone to avoid missing important calls during a call.
  • Page 75 Permitted 0-Phone, DND feature is effective for the phone system. Values 1-Custom, you can configure DND feature for each or all accounts. Default Web UI Features -> DND -> DND Mode After you choose a DND mode, you can configure DND feature for all lines or a specific line. It depends on the DND mode: ▪...
  • Page 76 Permitted Values String within 32 characters Default Black Web UI Features -> DND->Off Code Phone UI Menu->Features->DND->Off Code The following table lists the parameters you can use to configure DND in Custom mode. TelephonyDndStateX H3P/H3G: X=1~3 Parameter H6: X=1~4 config.<mac>.xml It triggers the DND feature to on or off.
  • Page 77 Phone UI Menu->Features->DND-> Account ID->Off Code DND synchronization feature provides the capability to synchronize the status of the DND features between the IP phone and the server. If the DND is activated in phone mode, the DND status changing locally will be synchronized to registered default accounts on the server.
  • Page 78 Call Forward Synchronization for Server-side Configuration You can change the following call forward Settings: ▪ Choose a call forward mode. You can configure call forward for all lines(Phone mode) or specific lines(Custom mode). ▪ Allow or disallow users to forward an incoming call to a telephone number. The following table lists the parameters you can use to configure DND Setting.
  • Page 79 It configures the always forward on code to activate the server-side always forward feature. The IP phone will send the always forward on code and the pre-configured destination number (configured by the parameter “ForwardImmDest”) to the server when you activate always forward feature on a phone basis. Example: Halo: ForwardImmOnCode2 = *72 Note: If default account is account 2 and the value of the parameter...
  • Page 80 It configures the busy forward on code to activate the server-side busy forward feature. The IP phone will send the busy forward on code and the pre-configured destination number (configured by the parameter “ForwardBusyDest”) to the server when you activate busy forward feature on a phone basis. Example: ForwardBusyOnCode = *90 Note: If default account is account 2 and the value of the parameter...
  • Page 81 It configures the no answer forward on code to activate the server-side no answer forward feature. The IP phone will send the no answer forward on code and the pre-configured destination number (configured by the parameter “ForwardNoReplyDest”) to the server when you activate no answer forward feature on a phone basis.
  • Page 82 Phone UI Menu->Features->Call Forward->Always Forward->account ID->Always Forward ForwardImmDestX H3P/H3G: X=1~3 Parameter H6: X=1~4 config.<mac>.xml It configures the destination number of the always forward on a phone basis. Description Note: It works only if “ForwardModeAccount” is phone to 1 (Custom). Permitted Values String within 32 characters Default...
  • Page 83 0-Off Permitted 1-On, incoming calls are forwarded to the destination number (configured by the Values parameter “ForwardBusyDestX”) when the callee is busy. Default Web UI Features -> Forward->Busy FWD->On/Off Phone UI Menu->Features->Call Forward->Busy Forward-> account ID->Busy Forward ForwardBusyDestX H3P/H3G: X=1~3 Parameter H6: X=1~4 config.<mac>.xml...
  • Page 84 H3P/H3G: X=1~3 H6: X=1~4 It triggers the no answer forward feature to on or off on a phone basis. Description Note: It work only if “ForwardModeAccount” is phone to 1 (Custom). 0-Off Permitted 1-On, incoming calls are forwarded to the destination number (configured by the Values parameter “ForwardNoReplyDestX”) after a period of ring time.
  • Page 85 Default Black Web UI Features -> Forward->Off Code(under No Reply FWD) Phone UI Menu->Features->Call Forward->No Reply Forward-> account ID->Off Code Call forward synchronization feature provides the capability to synchronize the status of the call forward features between the IP phone and the server. If the call forward is activated in phone mode, the forward status changing locally will be synchronized to registered default accounts on the server.
  • Page 86 Topic Multiple Call Appearances Configuration You can specify the maximum concurrent-call numbers per line key. The following table lists the parameters you can use to configure multiple call appearances. SIPMaxCall Parameter config.<mac>.xml Description It configures the maximum number of concurrent calls for all registered lines. Permitted Values NUMERIC[1,4]...
  • Page 87 Default 0;4;-1;200;420;335;-37;-37;-1;200;0;0;0;0;-1;200;420;335;-37;-37;-1;5000;0;0;0;0 Parameter HoldUseInactiveEnable config.<mac>.xml Description It enables or disables the phone to use inactive outgoing hold signaling Permitted false Values true Default false When a call is placed on hold, the IP phone will send an INVITE message to the specified MoH server account according to the SIP URI.
  • Page 88 The following table lists the parameter you can use to enable or disable keep mute if incoming calls are answered automatically. SIPAutoAnsweredMuteX H3P/H3G/H3W: (X=1-3) Parameter H6/H6W: (X=1-4) config.<mac>.xml Description It configures the keep mute feature for the IP phone. Permitted Values BOOLEAN :false/true Default...
  • Page 89 ➢ Consultative Transfer call : party A is in an active call with party B, party A click Menu Transfer to input party C Number, party A will begin a new call with party C by click Menu Call , Then ,party A can transfer this call to party B (the third party) by click Menu Transfer , and party A will disconnect.
  • Page 90 For a local conference, if the conference initiator leaves the conference, all parties are disconnected and the conference call ends. You can enable Transfer on Conference Hang Up feature, and allows the other parties to remain connected when the conference initiator drops the conference call.
  • Page 91 Auto Redial Configuration The following table lists the parameters you can use to configure auto redial. Paramet AutoRedialEnable config.<mac>.xml Descript It enables or disables the IP phone to automatically redial the last dialed number when the callee is temporarily unavailable. Permitt false Values...
  • Page 92 Permitted false Values true Default false Parameter AutoRecordingEnable config.<mac>.xml Description It enables or disables the automatic recording feature for the IP phone. Permitted false Values true Default false Password dial feature allows the callee number to be partly displayed on the IP phone when placing a call.
  • Page 93 The following table lists available languages supported by the phone user interface and the web user interface. Phone User Interface Web User Interface English English Franç ais French Deutsch Deutsch Italiano Italian Español Spanish Nederlands Nederlands Português Portuguese Magyar Hungarian Čeština Czech Slovenčina...
  • Page 94 Description It configures phone display language. Permitted Values 0-28 Default Phone UI Menu->Basic Setting -> language The screen saver will automatically start when the IP phone is idle for the preset waiting time. You can stop the screen saver at any time by pressing any key or touching the screen. When your phone is idle again for a preset waiting time, the screen saver starts again.
  • Page 95 21600-6h Default True Web UI Setting->display-> Timeout Phone UI Menu->Basic Setting-> Display-> Screen saver->Wait Time You can change the backlight brightness of the LCD screen during phone activity and inactivity. The backlight brightness automatically changes when the phone is idle for a specified time. You can change the screen backlight brightness and time in the following Settings: Active Level: The brightness level of the LCD screen when the phone is active.
  • Page 96 Permitted Values NUMERIC[1,9] Default Web UI Setting->Display->Inactive Backlight Level Phone UI Menu->Basic Setting-> Display-> Backlight->Inactive Level Parameter BackLightTimeout config.<mac>.xml It configures the delay time (in seconds) to change the intensity of the LCD screen when Description the IP phone isinactive. 0-Always On 15-15s 30-30s...
  • Page 97 a/Vincennes,Indiana/Winamac,Iqaluit,Jamaica,Kentucky/Louisville,Kentucky/Mont icello,Lima,Nassau,New_York,Nipigon,Panama,Pangnirtung,Port-au- Prince,Rio_Branco,Thunder_Bay,Toronto Anguilla,Antigua,Aruba,Asuncion,Barbados,Bermuda,Blanc- Sablon,Boa_Vista,Campo_Grande,Caracas,Cuiaba,Curacao,Dominica,Glace_Ba y,Goose_Bay,Grenada,Guadeloupe,Guyana,Halifax,Kralendijk,La_Paz,Lower_Pri nces,Manaus,Marigot,Martinique,Moncton,Montserrat,Port_of_Spain,Porto_Velho ,Puerto_Rico,Santiago,Santo_Domingo,St_Barthelemy,St_Kitts,St_Lucia,St_Tho -4:00 mas,St_Vincent,Thule,Tortola -3:30 St_Johns Araguaina,Argentina/Buenos_Aires,Argentina/Catamarca,Argentina/Cordoba,Arg entina/Jujuy,Argentina/La_Rioja,Argentina/Mendoza,Argentina/Rio_Gallegos,Arg entina/Salta,Argentina/San_Juan,Argentina/San_Luis,Argentina/Tucuman,Argenti na/Ushuaia,Bahia,Belem,Cayenne,Fortaleza,Godthab,Maceio,Miquelon,Montevid eo,Palmer,Paramaribo,Punta_Arenas,Recife,Rothera,Santarem,Sao_Paulo,Stanl -3:00 -2:00 Noronha,South_Georgia -1:00 Azores,Cape_Verde GMT,UTC,Universal,Abidjan,Accra,Bamako,Banjul,Bissau,Canary,Conakry,Dakar ,Danmarkshavn,Faroe,Freetown,Greenwich,Guernsey,Isle_of_Man,Jersey,Lisbon ,Lome,London,Madeira,Monrovia,Nouakchott,Ouagadougou,Reykjavik,Sao_Tom e,St_Helena,Troll,Zulu Algiers,Amsterdam,Andorra,Bangui,Belgrade,Berlin,Bratislava,Brazzaville,Brussel s,Budapest,Busingen,Casablanca,Ceuta,Copenhagen,Douala,Dublin,El_Aaiun,Gi braltar,Kinshasa,Lagos,Libreville,Ljubljana,Longyearbyen,Luanda,Luxembourg,M adrid,Malabo,Malta,Monaco,Ndjamena,Niamey,Oslo,Paris,Podgorica,Porto- Novo,Prague,Rome,San_Marino,Sarajevo,Scoresbysund,Skopje,Stockholm,Tiran +1:00 e,Tunis,Vaduz,Vatican,Vienna,Warsaw,Zagreb,Zurich Amman,Athens,Beirut,Blantyre,Bucharest,Bujumbura,Cairo,Chisinau,Damascus, Famagusta,Gaborone,Gaza,Harare,Hebron,Helsinki,Jerusalem,Johannesburg,Ka liningrad,Khartoum,Kiev,Kigali,Lubumbashi,Lusaka,Maputo,Mariehamn,Maseru,M +2:00 babane,Nicosia,Riga,Sofia,Tallinn,Tripoli,Uzhgorod,Vilnius,Windhoek,Zaporozhye Addis_Ababa,Aden,Antananarivo,Asmara,Baghdad,Bahrain,Comoro,Dar_es_Sal aam,Djibouti,Istanbul,Juba,Kampala,Kirov,Kuwait,Mayotte,Minsk,Mogadishu,Mos +3:00 cow,Nairobi,Qatar,Riyadh,Simferopol,Syowa +3:30...
  • Page 98 +9:30 Adelaide,Broken_Hill,Darwin Brisbane,Chuuk,Currie,DumontDUrville,Guam,Hobart,Lindeman,Melbourne,Port_ +10:00 Moresby,Saipan,Sydney,Ust-Nera,Vladivostok +10:30 Lord_Howe Bougainville,Efate,Guadalcanal,Kosrae,Macquarie,Magadan,Norfolk,Noumea,Po +11:00 hnpei,Sakhalin,Srednekolymsk Anadyr,Auckland,Fiji,Funafuti,Kamchatka,Kwajalein,Majuro,McMurdo,Nauru,Tara +12:00 wa,Wake,Wallis +12:45 Chatham +13:00 Apia,Enderbury,Fakaofo,Tongatapu +14:00 Kiritimati Topic TimeZone Configuration The following table lists the parameters you can use to configure the TimeZone. Parameter DmAdmcfgTimeZoneUtoffphone config.<mac>.xml Description It configures TimeZone. Permitted Values CHOICE...
  • Page 99 Web UI Setting->Time&Date->SNTP Secondary Address Parameter DmEnetcfgSntpRefreshPeriod config.<mac>.xml It configures the interval (in seconds) at which the phone updates time and date from the Description NTP server. Permitted Values NUMERIC[0,*] Default 3600 Web UI Setting->Time&Date->SNTP Refresh Period You can phone DST for the desired area as required. By default, the DST is phone to disable, if phone to Automatic, it can be adjusted automatically from the current time zone configuration.
  • Page 100 Default Web UI Setting->Time&Date->DST Start Date Parameter DmAdmcfgDstEndDate config.<mac>.xml It configures the Daylight Saving Time (DST) EndDate Note: It works only if “LocalAdmcfgDstEnable” is phone to 1 (Enable).and Description LocalAdmcfgDstType is phone to date Permitted Values TEXT Default Web UI Setting->Time&Date->DST End Date Parameter DmAdmcfgDstStartWeek...
  • Page 101 Note: It works only if “LocalAdmcfgDstEnable” is phone to 1 (Enable) Permitted Values NUMERIC[-300,300] Default Web UI Setting->Time&Date->Offset(min) You can configure the time and date manually when the phones cannot obtain the time and date from the NTP time server. You can phone the time and date by phone web UI. You can customize the time and date by choosing between a variety of time and date formats, including options to date format with the day, month, or year, and time format in 12 hours or 24 hours, or you can also customize the date format as required.
  • Page 102 0 - WWW MMM DD 1 - DD-MMM-YY 2 - YYYY-MM-DD 3 - DD/MM/YYYY 4 - MM/DD/YY 5 - DD MMM YYYY 6 - WWW DD MMM 7 - MM DD WWW 8 - YY-MM-DD 9 - YYYY/MM/DD Permitted 10 - YY/MM/DD Values 11 - YYYY MM DD Default...
  • Page 103 Default Web UI Setting->ringing Phone UI Menu->Basic Setting-> Sound->Ringing->Ringing Device Halo series phones support programmable Keys in phone. You can configure different functions to DSS keys. This section explains how to configure Program keys. Topics Supported DSS Keys Supported DSSkey Types Programmable Keys Programmable Hard Keys The following table lists the number of DSS keys you can configure for each phone model:...
  • Page 104 Direct Pickup Group Pickup Call Park Recall XML Browser Intercom Retrieve Park AudioHub Private Hold Hold Account Usb Recording You can customize programmable keys on the phone to enable users to access frequently to use functions, or, if your phone does not have a particular hard key, you can create a soft key. For example, if the phone does not have a Do Not Disturb hard key, you can create a Do Not Disturb soft key.
  • Page 105 PhoneProgKeyXLabel Parameter config.<mac>.xml It configures the label displayed on the phone screen for a specific programmable key. Description This is an optional configuration. Permitted Values String within 64 characters Default empty Web UI Phone Keys->Program Keys Phone UI long press softkey to enter programkey configure menu PhoneProgKeyXNumber Parameter config.<mac>.xml...
  • Page 106 10 - HeadSet 11 - Hot Desking 12 - Phone Lock 13 - Prefix 18 - Recall 19 - XML Browser 21 - Intercom 23 - AudioHub 101 - Menu 102 - History 103 - Status Default Web UI Phone Keys->Dynamic Softkey Parameter config.<mac>.xml ProgramKey***Account...
  • Page 107 Headset Down Left Right Cancel VolUp VolDown Wallpaper is a picture which is used as the background of the IP phone. The phones have 5 default pictures. And user can also change it to custom wallpaper from personal pictures. The wallpaper is only applicable to H6/H6W IP phones.
  • Page 108 Call Display is used in phone ringing, calling process, hold and other scenarios. This function is mainly used by users to configure the full name display method according to their own habits. There are two main configuration items, defined as CallDisplayPart and CallDisplaySource. ➢...
  • Page 109 Topics 3/6 way conference Hot Desking Intercom Voice Mail XML Browser Call Pickup Call park & retrieve Share Line Call Completion Automatic Call Distribution (ACD) Broadsoft Hoteling Halo phone H3P/H3G/H6/H3W/H6W have the capability to launch a 6 way conference by local. After establish 3 way conference, user press ‘Conf’...
  • Page 110 ➢ Features—General: Parameter SIPLocalConfEnable config.<mac>.xml Description It enables or disables local conference function. Permitted true values false Default true WEB UI Features->General Parameter SIPMaxCall config.<mac>.xml Description it define the max call capacity of phone Permitted values Default MMI UI WEB UI Features->General Parameter LocalConfPartyMax...
  • Page 111 Long press a program key more than 2s, select the key type as Hot Desking. Press programkey to activate Hotdesking for Halo phone. Login your number to be registered for Halo phone: Copyright @ALE 2020 All Rights Reserved...
  • Page 112 Parameter PhoneProgKeyXType config.<mac>.xml Description Programkkey configuration: X is the number of selected programkey Permitted values 11 - Hot Desking Default MMI UI select one programkey then long press it for 2s, select KeyType as Hot Desking WEB UI Phone Keys->Program Keys Parameter PhoneProgKeyXLabel config.<mac>.xml...
  • Page 113 Parameter PhoneProgKeyXType config.<mac>.xml Description X is the number of selected programkey Permitted values 21 - Intercom Default MMI UI select one programkey then long press it for 2s, select KeyType as Intercom WEB UI Phone Keys->Program Keys Parameter PhoneProgKeyXAccount config.<mac>.xml Description X is the accountid Permitted...
  • Page 114 Default select one programkey then long press it for 2s, select the account you want to config MMI UI to use intercom WEB UI Phone Keys->Program Keys Parameter PhoneProgKeyXLabel config.<mac>.xml Description input the name of this programkey Permitted values strings Default empty string MMI UI...
  • Page 115 SIPAutoAnsweredAllowedX Parameter config.<mac>.xml If phone to true, the phone may auto answer to incoming call if requested by SIPUA layer. Description Permitted true values false Default true MMI Menu Menu->Feature->Intercom->Account WEB Menu Features ->Intercom-> Enable Intercom Parameter SIPAutoAnsweredMuteX config.<mac>.xml Description when the phone auto answer an intercom call , it will mute or not Permitted true...
  • Page 116 Permitted true values false Default FALSE WEB Menu Features ->Intercom-> Intercom Barge Parameter SIPGroupXIntercomType config.<mac>.xml Description it define the intercom Type for accountX allowed value : 0 - Call-info Permitted allowed value : 1 - Alert-info values allowed value : 2 - Answer-mode Default 0-Call-info MMI Menu...
  • Page 117 MMI UI Menu->Voicemail WEB UI Account->Advanced Parameter SIPMessageWaitingIndicationUriX config.<mac>.xml It configures message waiting indication server address for account.it enables or Description disables phone to popup the message notification when receive new voicemail. Permitted values string Default empty string MMI UI Menu->Voicemail WEB UI Account->Advanced...
  • Page 118 Parameter PhoneProgKeyXType config.<mac>.xml Description X is the number of selected programkey Permitted values 59 - BLF Default MMI UI select one programkey then long press it for 2s, select KeyType as BLF WEB UI Phone Keys->Program Keys Parameter PhoneProgKeyXAccount config.<mac>.xml Description X is the accountid Permitted...
  • Page 119 WEB UI Phone Keys->Program Keys Halo series phones support XML Browser function with the same behavior. The XML browser feature allows users to develop and deploy custom services which meet user’s functional requirements on the server. Users can customize particular applications, such as weather report, stock information, Google search, news service, and so on.
  • Page 120 WEB UI Phone Keys->Program Keys Parameter PhoneProgKeyXNumber config.<mac>.xml Description input the http/https path of this programkey Permitted values strings Default empty string select one programkey then long press it for 2s, input strings for Label to define a MMI UI path to get from server WEB UI Phone Keys->Program Keys...
  • Page 121 Permitted values 15 - Direct Pickup Default MMI UI select one programkey then long press it for 2s, select KeyType as Direct Pickup WEB UI Phone Keys->Program Keys Parameter PhoneProgKeyXAccount config.<mac>.xml Description X is the accountid Permitted values 1~8 for Halo phone Default select one programkey then long press it for 2s, select the account you want to config to MMI UI...
  • Page 122 Parameter PhoneProgKeyXType config.<mac>.xml Description X is the number of selected programkey Permitted values 16 - Group Pickup Default MMI UI select one programkey then long press it for 2s, select KeyType as Group Pickup WEB UI Phone Keys->Program Keys Parameter PhoneProgKeyXAccount config.<mac>.xml Description...
  • Page 123 Call park allows users to park a call on a special extension and then retrieve it from another phone (for example, a phone in another office or conference room). Topics Call park & retrieve configuration on WEB for Halo phone Call park configuration parameters for Halo phone Parameter PhoneProgKeyXType...
  • Page 124 select one programkey then long press it for 2s, input strings for Label to define a MMI UI name WEB UI Phone Keys->Program Keys Parameter PhoneProgKeyXNumber config.<mac>.xml Description input the Call Park number Permitted values strings Default empty string select one programkey then long press it for 2s, input strings for Label to define a MMI UI number WEB UI...
  • Page 125 Permitted values strings Default empty string select one programkey then long press it for 2s, input strings for Label to define a MMI UI number WEB UI Phone Keys->Program Keys When user places a call and the callee is temporarily unavailable to answer the call, SIPMMI will save the callee’s number and use the SUBSCRIBE/NOTIFY method to subscriber callee’s status.
  • Page 126 Topics Reset device to factory default via web Reset device to factory default via phone MMI Reset device to factory default by phone combination keys Go into the phone web menu: Maintenance-> Reboot&Restore Copyright @ALE 2020 All Rights Reserved...
  • Page 127 For Halo series phones, user can go into the phone MMI: Advanced Setting -> Restore factory For Halo series phones, in phone idle status, user can long press conference hard key longer than 10s,then the phone will popup "This action will restore all configurations to factory", if select ok, the phone popup "Reset...
  • Page 128 The phone provides a quick way to reboot the phone. You need to press the C key for 10 seconds. The phone will pop up an inquiry box to ask whether to restart. Press ok: Will reboot in a few seconds Press cancel ：Cancel the operation You can choose to generate the log files locally or sent to syslog server in real time, and use these log files to generate informational, analytic and troubleshoot phones.
  • Page 129 Parameter BackupuploadMethod config.<mac>.xml Description It configures the way to upload files(post/put). Permitted 0 - put values 1 - post Default Parameter CallLogBackupEnable config.<mac>.xml Description It configures to enable or disable callLogBackup Permitted false values true Default false User can also configure the IP phone to send syslog messages to a syslog server in real time. The following table lists the parameters you can use to configure syslog logging.
  • Page 130 Connect the Internet port of the IP phone to the Internet and the PC port of the IP phone to a PC. Before capturing the signal traffic, make sure the IP phone can span data packets received from the Internet port to the PC port. The following table lists the parameter you can use to configure span to PC port.

This manual is also suitable for:

Halo h3gHalo h6Halo h3wHalo h6w