Alcatel-Lucent ALE M3 Administrator's Manual page 180

•
Step 3: Save the change and place this file on the provisioning server.
11.16.3 Softkey Layout Configuration
The following table lists the parameters you can use to configure the softkey layout.
Parameter SettingCustomSoftkeyEnable
Description It enables or disables the custom softkey layout feature.
false - disable
Permitted
Values
true - enable
Default false
WEB → Settings → Softkey Layout → Custom Softkey
Web UI
Parameter SettingCustomSoftkeyStateList
It configures the desired call state to apply the custom softkey layout.
Description
Note: Multiple call states are separated by commas. It works only if
"SettingCustomSoftkeyEnable" is set to true (Enabled).
Blank - all call states will use the custom softkey layout)
Dial - Dial state
DialEmpty - DialEmpty state
TransDial - TransDial state
TransDialEmpty - TransDialEmpty state
ConfDial - ConfDial state
ConfDialEmpty - ConfDialEmpty state
Permitted
Values
Calling - Calling state
Transferring - Transferring state
CallFailed - CallFailed state
Ringing - Ringing state
NewCallin - NewCallin state
ConfNewCallin - ConfNewCallin state
Conversation - Conversation
ALE M3-M5-M7-M8 DeskPhones Administrator Guide
config.xml
config.xml
180