Table of Contents
Advertisement
12
13
14
N<1 or N>15
7.4.1.3 Alert-Info: info=info text; x-line-id=0
When the Alert-Info header contains an info text, the IP phone will map the text with the Internal Ringer Text
preconfigured on the IP phone, and then play the ring tone associated with the Internal Ringer Text (the ring
tone can be configured by the parameter). If no internal ringer text maps, the IP phone will play the
preconfigured local ring tone in about 10 seconds.
Example:
Alert-Info: info=family; x-line-id=0
7.4.1.4 Alert Info for Auto Answer
If the INVITE request contains the following type of strings, the IP phone will answer incoming calls
automatically without playing the ring tone:
•
Answer-Mode: Auto
•
Alert-Info: info = alert-autoanswer
•
Call-Info: answer-after = 0 (or Call-Info: Answer-After = 0)
7.5 Ringer Device
The IP phones support ringing from speaker or headset or both. You can configure which ringer device to be
used when receiving an incoming call.
For example, if the ringer device is configured on speaker, the ring tone will be played through loud speaker.
If the ringer device is configured on headset or Headset & Speaker, the headset should be connected to the
IP phone and the Headset mode also should be activated in advance.
The following table lists the parameters you can use to configure ringer device.
Parameter
SettingRingDevice
Description
It configures Audio Ring Device.
0 - handsfree
Permitted
1 - Headset
Values
2 - handsfree_plus_Headset
Default
0
Setting → Ringing → Ring Device
Web UI
Basic Setting → Sound → Ringing → Ring Device
Phone UI
7.6 Tones
When receiving a message, the IP phone will play a warning tone. You can customize tones or select
specialized tone phones (varying from country to country) to indicate different status of the IP phone.
7.6.1 Supported Country Tones
The default country tone is UK. Available list as follows:
•
UK
ALE M3-M5-M7-M8 DeskPhones Administrator Guide
ring12
ring13
ring14
ring00
config.xml
79
Advertisement
Table of Contents
