Table of Contents
Advertisement
Parameter
FeatureHotlineDelayTimeout
It configures the waiting time (in seconds) for the IP phone to automatically dial out the
preset hotline number.
Description
Note: If it is set to 0, the IP phone will dial out the configured hotline number
immediately when you lift the handset, press the loudspeaker key or press the account
key
Permitted
Integer from 0 to 10
Values
Default
0
Features → Hotline → Delay Time
Web UI
Menu → Features → Hotline → Delay
Phone UI
10.3 Recall
Recall, also known as last call return, allows you to dial the last received call. Recall is implemented on IP
phones using a programming key.
The following table lists the parameter you can use for recall configuration:
Note:
X means programmable key ID and it can be number 1~20 for M3,1~28 for M5/M7 and 1-36 for M8.
<?xml version="1.0" encoding="UTF-8" ?>
<settings>
<setting id=" PhoneProgKey4Type" value="18" override="true"/>
<setting id=" PhoneProgKey4Label " value="Recall" override="true"/>
</settings>
After configuration, a recall key is available on the phone.
When you press the recall key, the phone will dial the last received call.
10.4 Speed Dial
Speed dial allows you to speed up dialing the contacts on the phone's idle screen using dedicated
programmable keys.
The following table lists the parameter you can use to speed dial configuration:
Note:
X means programmable key ID and it can be number 1~20 for M3,1~28 for M5/M7 and 1-36 for M8.
ALE M3-M5-M7-M8 DeskPhones Administrator Guide
config.xml
100
Advertisement
Table of Contents
