Alcatel-Lucent ALE M3 Administrator's Manual page 98

It enables or disables the entered number to match the predefined string of the digit map
Description
after pressing a send key. It is only applicable to the off-hook dialing.
Permitted true - enable
Values false - disable
Default true
10.1.2.3 Digit Map for a Specific Line Configuration
The following table lists the parameters you can use to specific account digit map:
Note: X means account ID and it can be number 1~8 for M3/M5/M7, 1-20 for M8.
Parameter AccountXDigitMapEnable
Description It enables or disables the digit map feature for a specific account.
Permitted true - enable
Values false - disable
Default true
Parameter AccountXDigitMap
Description It enables or disables the digit map feature for a specific account.
Permitted
String within 2048 characters
Values
Default Blank
Parameter AccountXDigitMapTimer
Description It configures the dial rule to match the timeout (the value of T) in seconds.
Permitted
0-18
Values
Default Blank
Parameter AccountXDigitMapInHistoryEnable
It enables or disables the digit map to be applied to the numbers (received calls or
Description
missed calls) dialed from the call history list.
Permitted true - enable
Values false - disable
Default true
Parameter AccountXDigitMapInDirectoryEnable
It enables or disables the digit map to be applied to the numbers dialed from the
Description
directory.
Permitted true - enable
Values false - disable
ALE M3-M5-M7-M8 DeskPhones Administrator Guide
config.xml
config.xml
config.xml
config.xml
config.xml
98