Alcatel-Lucent ALE M3 Administrator's Manual page 35

It configures the timeout interval (in seconds) to transfer a file for HTTP/HTTPS connection.
Note: When the HTTP/HTTPS connection cannot be successfully established within the
Description
configured time, the phone will exit the current auto provisioning process and perform the
next one.
Permitted
Integer from 1 to 20
Values
Default 10
Parameter DeviceProvisionAttemptExpiredTime
It configures the timeout interval (in seconds) to transfer a file via auto provisioning.
Description
Note: When the phone cannot complete the downloading of configuration file within the
configured time, it will exist the current auto provisioning process and execute the next one.
Permitted
Integer from 1 to 300
Values
Default 20
3.6.4 Multistage Request Mechanism
To deal with the issue (e.g. the phone may loop indefinitely to perform the auto provisioning process) caused
by the parameter DeviceProvisionServerUrl in the configuration file, a new parameter
DeviceProvisionImmediateUpdateTimes has been added.
When the parameter DeviceProvisionImmediateUpdateTimes is set to default value :0, the phone, after
getting the configuration file, will not execute the auto provisioning process for the acquired URL, but will
save the new URL to replace the old one.
When the parameter DeviceProvisionImmediateUpdateTimes is not default value 0 but value 2, after
getting the configuration file which includes auto provisioning url1 (file1), the phone will request the auto
provisioning url1 to download file1 which includes auto provisioning url2 (file2). After the phone requests the
auto provisioning url2 to download the file2 which includes auto provisioning url3 (file3) successfully, the
phone will finally request the auto provisioning url3 to download the file3 which includes auto provisioning
url4 (file4). At this time, the auto provisioning request reached 3 (n+1) times, so the phone will exit the auto
provisioning process and save the auto provisioning url4 to replace auto provisioning url3.
During the whole multistage request process, if the new acquired URL is the same as one of the records in
the list, for example, URL 2 is same as URL1, the device will exit the auto provisioning process directly after
getting the file2.
The following table lists the parameter you can use to configure the settings for multistage request
mechanism.
Parameter DeviceProvisionImmediateUpdateTimes
It configures the times of auto provisioning the phone executes if the phone gets the new
Description
auto provisioning URL.
Permitted
Integer from 0 to 20
Values
Default 0
ALE M3-M5-M7-M8 DeskPhones Administrator Guide
config.xml
config.xml
35