Alcatel-Lucent ALE M3 Administrator's Manual page 168

For example, when you assign the Speed Dial to the programmable key, this parameter
is used to specify the contact number you want to dial out. It is also used to specify the
contact number with the DTMF sequence. The contact number and DTMF sequence
are separated by commas.
Note: You need to configure this parameter when "programablekey.X.type" is set to 1,
59, 5, 14, 13, 15, 16,17,19,21,22 or 73.
X can be 1-20 for M3, 1-28 for M5/M7 and 1-36 for M8.
Permitted
String within 64 characters
Values
Default empty
Phone Keys → Program Keys
Web UI
Phone UI Long press softkey to enter programmable key configuration menu.
Parameter ProgramKeyXExtension
For BLF feature:
It configures the pickup code.
Description
Note: It is only applicable when "programablekey.X.type" is set to 59.
X can be 1-20 for M3, 1-28 for M5/M7 and 1-36 for M8.
Permitted
String within 64 characters
Values
Default empty
Phone Keys → Program Keys
Web UI
Phone UI Long press softkey to enter programmable key configuration menu.
11.10.3.2 Dynamic Keys Configuration
This feature supports configuring the programming hard keys and soft keys such as key Redial/key Hold/key
conference and so on.
Users can configure these keys for custom functions such as Speed Dial/DND/Forward and so on.
The *** in the table will be replaced by Key Name in the actual database.
The feature can be configured by the following parameters in the configuration file:
Parameter DynamicSoftKeyXType
It configures the key type for a specific programmable key.
Description
Note: X can be 1- 4 for M3/M5/M7, or 1-5 for M8.
0 - Not Used
1 - Speed Dial
3 - Do Not Disturb
4 - Directory
Permitted
7 - Forward
Values
10 - Headset
11 - Hot Desking
12 - Phone Lock
13 - Prefix
ALE M3-M5-M7-M8 DeskPhones Administrator Guide
config.xml
config.xml
168