Table of Contents
Advertisement
If an explicit port (except 0) is specified, A query will be performed only. If a server port is 0 and then the
transport type is DNS-NAPTR, NAPTR and SRV queries will be tried before falling to A query. If no port is
found through the DNS query, 5060 will be used.
The following table lists the parameters you can use to configure SIP server name resolution.
Note:
X means account ID. It can be number 1~8 for M3/M5/M7, and 1-20 for M8.
Parameter
AccountXServer1Transport
Description
It configures the type of transport protocol.
0 - UDP
1 - TCP
2 - TLS
Permitted
3 - DNS NAPTR
Values
Note: If no server port is given, the IP phone performs the DNS NAPTR and SRV
queries for the service type and port.
Default
0
Account → Basic → Transport Mode
Web UI
ALE M3-M5-M7-M8 DeskPhones Administrator Guide
config.xml
92
Advertisement
Table of Contents
