Alcatel-Lucent ALE M3 Administrator's Manual page 133

Autop Finish
Headset
Handfree
Peripheral Information
VPN IP
Reboot
Reset
Screen Active
Screen Inactive
Conference Established
10.26.2 Variable Values List
The following table lists pre-defined variable values.
Variable Value
$mac
$ip
$model
$firmware
$active_url
$active_user
$active_host
$local
$remote
$display_local
$display_remote
ALE M3-M5-M7-M8 DeskPhones Administrator Guide
When the IP phone completes auto provisioning via power on.
When the IP phone presses the HEADSET key.
When the IP phone presses the Speakerphone key.
When the accessory is unplugged or plugged.
When the phone IP address assigned by the VPN server changes.
When the IP phone starts reboot.
When the IP phone starts reset.
When the IP phone screen is active.
When the IP phone screen is inactive.
When the IP phone establishes a conference.
Description
The MAC address of the IP phone.
The IP address of the IP phone.
The IP phone model.
The firmware version of the IP phone.
The SIP URI of the current account when the IP phone places a call,
receives an incoming call or establishes a call.
The user part of the SIP URI for the current account when the IP phone
places a call, receives an incoming call or establishes a call.
The host part of the SIP URI for the current account when the IP phone
places a call, receives an incoming call or establishes a call.
The SIP URI of the caller when the IP phone places a call.
The SIP URI of the callee when the IP phone receives an incoming call.
The SIP URI of the callee when the IP phone places a call.
The SIP URI of the caller when the IP phone receives an incoming call.
The display name of the caller when the IP phone places a call.
The display name of the callee when the IP phone receives an incoming
call.
The display name of the callee when the IP phone places a call.
The display name of the caller when the IP phone receives an incoming
call.
133