Alcatel-Lucent ALE M3 Administrator's Manual page 107

The IP phones also support 2 methods to activate and deactivate server-side DND feature. They may vary
on different servers.
•
Prefix mode: (default) The IP phone will send on code or off code to synchronize the status of the
DND between the IP phone and the server.
•
Subscribe mode: The IP phone will send subscribe message to synchronize the status of the DND
between the IP phone and the server when forward states change. With this phone, you don't need
to configure on code or off code on IP phone.
10.13.3 DND in Phone Mode Configuration
The following table lists the parameters you can use to configure DND in Phone mode.
Parameter FeatureDndEnable
It turns on or off the DND feature.
Description
Note: It works only if "FeatureDndMode" is set to 0 (Phone).
false - disable
Permitted
Values
true - enable: The IP phone will reject incoming calls on all accounts.
Default false
Features → DND → Enable DND
Web UI
Menu → Features → DND
Phone UI
Parameter FeatureDndOnCode
It configures the DND on code to activate the server-side DND feature. The IP phone will
Description send the DND on code to the server when you activate DND feature on the IP phone.
Note: It works only if "FeatureDndMode" is set to 0 (Phone).
Permitted
String within 32 characters
Values
Default Blank
Features → DND → On Code
Web UI
Phone UI
Menu → Features → DND → On Code
Parameter FeatureDndOffCode
It configures the DND off code to deactivate the server-side DND feature. The IP phone
will send the DND off code to the server when you deactivate DND feature on the IP
Description
phone.
Note: It works only if "FeatureDndMode" is set to 0 (Phone).
Permitted
String within 32 characters
Values
Default Blank
Features → DND → Off Code
Web UI
Phone UI
Menu → Features → DND → Off Code
ALE M3-M5-M7-M8 DeskPhones Administrator Guide
config.xml
config.xml
config.xml
107