Alcatel-Lucent ALE M3 Administrator's Manual page 129

By default, all the listening groups are considered with a certain priority from 1 (lower priority) to 25 (higher
priority).If you neither want to receive some paging calls nor miss urgent paging calls when there is a voice
call or paging call, or when DND is activated, you can use the priority to define how your phone handles
different incoming paging calls.
Paging Barge
You can set your phone whether an incoming paging call interrupts an active call.
The Paging Barge defines the lowest priority of the paging group from which the phone can receive a paging
call when there is a voice call (a normal phone call rather than a multicast paging call) in progress. You can
specify a priority that the incoming paging calls with higher or equal priority are automatically answered, and
the lower ones are ignored.
If it is disabled, all incoming paging calls will be automatically ignored.
Paging Priority
You can set your phone whether a new incoming paging call interrupts a current paging call.
The Paging Priority feature decides how the phone handles incoming paging calls when there is already a
paging call on the phone. If enabled, the phone will ignore incoming paging calls with lower priorities, otherwise,
the phone will answer incoming paging calls automatically and place the previous paging call on hold. If
disabled, the phone will automatically ignore all incoming paging calls.
DND for Ignoring Paging Call
If you do not want to miss some urgent paging calls when DND is activated. You can use the Ignore DND
feature to define the lowest priority of paging group from which the phone can receive an urgent paging call
when DND is activated. You can specify a priority that the incoming paging calls with higher or equal priority
are automatically answered, and the lower ones are ignored.
If it is disabled, all the incoming paging calls will be ignored when DND is activated in phone mode.
The following table lists the parameters you can use to change multicast paging settings.
Parameter MulticastCodec
Description It configures the codec for multicast paging.
0 - PCMU mulaw
8 - PCMA alaw
Permitted
Values
9 - G722
18 - G729
Default 9
Features → Multicast Paging → Multicast Paging Codec
Web UI
Parameter MulticastReceiveCallBargePriority
It configures the priority of the voice call (a normal phone call rather than a multicast
Description
paging call) in progress.
Permitted
0-25
Values
Default 0
Features → Multicast Paging → Paging Barge
Web UI
Parameter MulticastReceiveIgnoreDndPriority
ALE M3-M5-M7-M8 DeskPhones Administrator Guide
config.xml
config.xml
config.xml
129