Alcatel-Lucent ALE M3 Administrator's Manual page 9

It configures the IPv4 address.
Note: It works only if "DeviceNetworkIpStackMode" is set to IPv4, and
Description
"DeviceNetworkDhcpMode" is set to Static.
Permitted
IPv4 Address
Values
Default 0.0.0.0
Network → IP parameters → IP Address
Web UI
Menu → Advanced Setting (default password: 123456) → Network → IP Config → IPv4
Phone UI
Settings → IP
Parameter DeviceNetworkSubnetMask
It configures the IPv4 subnet mask.
Note: It works only if "DeviceNetworkIpStackMode" is set to IPv4, and
Description
"DeviceNetworkDhcpMode" is set to Static.
Permitted
Subnet Mask
Values
Default 255.255.255.255
Network → IP parameters → Subnet Mask
Web UI
Menu → Advanced Setting (default password: 123456) → Network → IP Config → IPv4
Phone UI
Settings → S/net
Parameter DeviceNetworkGateway
It configures the IPv4 default gateway.
Note: It works only if "DeviceNetworkIpStackMode" is set to IPv4, and
Description
"DeviceNetworkDhcpMode " is set to Static.
Permitted
IPv4 Address
Values
Default 0.0.0.0
Network → IP parameters → Gateway
Web UI
Menu → Advanced (default password: 123456) Setting → Network → IP Config → IPv4
Phone UI
Settings → Gateway
Parameter DmEnetcfgDns1
It configures the primary IPv4 DNS server.
Note: It works only if "DeviceNetworkIpStackMode" is set to IPv4, and
Description
"DeviceNetworkDhcpMode" is set to Static.
Permitted
IPv4 Address
Values
Default Blank
Network → IP parameters → DNS1
Web UI
Menu → Advanced (default password: 123456) Setting → Network → IP Config → IPv4
Phone UI
Settings → DNS1
Parameter DmEnetcfgDns2
ALE M3-M5-M7-M8 DeskPhones Administrator Guide
config.xml
config.xml
config.xml
config.xml
9