Alcatel-Lucent ALE M3 Administrator's Manual page 210

Parameter FeatureCallParkMode
Description It configures the call park method.
0 - Direct call
Permitted
Values
1 - Blind transfer call
Default 1
12.9.4 Retrieve Park configuration parameters
The following table lists the parameters you can use to configure one softkey to perform retrieve park
function.
Parameter ProgramKeyXType
It configures the programmable key type. X can be number 1~20 for M3, 1~28 for
Description
M5/M7 and 1~36 for M8.
Permitted
22 – Retrieve Park
Values
Default 0
Phone UI Select one program key, long press it for 2s, and select Key Type as Retrieve.
Phone Keys → Program Key
Web UI
Parameter ProgramKeyXAccount
It configures the account index of program key. X can be number 1~20 for M3, 1~28
Description
for M5/M7 and 1~36 for M8.
1~8
Permitted
Values
Note: For M8, the value can be 1~20.
Default 1
Select one program key, long press it for 2s, and select the account intended to use
Phone UI
Retrieve.
Phone Keys → Program Key
Web UI
Parameter ProgramKeyXLabel
It configures the programmable key label. X can be number 1~20 for M3, 1~28 for
Description
M5/M7 and 1~36 for M8.
Permitted
strings
Values
Default Blank
Phone UI Select one program key, long press it for 2s, and input a label name.
Phone Keys → Program Key
Web UI
Parameter ProgramKeyXValue
ALE M3-M5-M7-M8 DeskPhones Administrator Guide
config.xml
config.xml
config.xml
config.xml
config.xml
210