Alcatel-Lucent ALE M3 Administrator's Manual page 21

2.7.1 Supported Transmission Methods
Three methods of configuration transmission for IP phone Internet port and PC port:
•
Auto-negotiate
•
Half-duplex
•
Full-duplex
Auto-negotiate is configured for both Internet port and PC port on the IP phone by default.
2.7.2 Internet Port and PC Port Configuration
The following table lists the parameters you can use to configure Internet port and PC port.
Parameter DeviceNetworkLanAutoEnable
Description It configures the transmission method for Internet port.
false - disable
Permitted
Values
true - enable
Default true
Network → Port → LAN Auto
Web UI
Menu → Advanced Setting (default password: 123456) → Network → Ethernet → LAN →
Phone UI
Auto
Parameter DeviceNetworkLanSpeed
It configures the transmission method for Internet port.
Description
Note: It works only if "DeviceNetworkLanAutoEnable" is set to false.
10
Permitted
Values
100
Default 1000
Network → Port → LAN Speed
Web UI
Menu → Advanced Setting (default password: 123456) → Network → Ethernet → LAN →
Phone UI
LAN speed
Parameter DeviceNetworkLanDuplexType
It configures the transmission method for Internet port.
Description
Note: It works only if "DeviceNetworkLanAutoEnable" is set to false.
Half
Permitted
Values
full
Default half
Network → Port → Lan Duplex
Web UI
Menu → Advanced Setting (default password: 123456) → Network → Ethernet → LAN →
Phone UI
LAN duplex
Parameter DeviceNetworkPcAutoEnable
Description It configures the transmission method for PC port.
false - disable
Permitted
Values
true - enable
ALE M3-M5-M7-M8 DeskPhones Administrator Guide
config.xml
config.xml
config.xml
config.xml
21