Starting Up And Shutting Down The System; Starting Up The System - FujiFilm FDR ES DR-ID1270 Operation Manual

3.2 Starting Up and Shutting Down the System

This section explains how to start up and shut down the system. Operations are required on the power
supply unit, power box, flat panel sensor and image processing unit.
The procedure below is an example of using the image processing unit DR-ID 300CL. For details on the image
processing unit being used, see the Operation Manual provided with the personal computer.

3.2.1 Starting Up the System

(When only the flat panel sensor is used)
Make sure that the power cable is connected to the image processing unit.
3
1
Install the fully charged battery pack to the flat panel sensor.
2
When the optional access point is used, connect the access point to the image processing unit.
Use the optional access point by connecting it to the preset image processing unit and to the USB
connector. Do not use the optional access point by connecting it to other image processing unit and/
or USB connector.
3
After making sure below items are performed, press the power switch for the image processing
unit. The initialization process starts.
• All cables should be connected properly.
• No media should be inserted into the disk drive of image processing unit.
If the control cabinet is included in the system, the control cabinet starts up automatically.
If the power status LED of the control cabinet does not come on after turning on the image
processing unit, turn on the control cabinet.
4
The Patient Information Input Screen below appears following the opening screen on the image
processing unit monitor.
Patient Information Input Screen
3-8
DR-ID1270 Operation Manual
CAUTIONS
CAUTIONS
897N120821E