Table of Contents
Advertisement
When the devices are used outdoors in wireless communication mode, contact our official
dealer or FUJIFILM Representative.
CAUTIONS/ATTENTION
Do not place any object in a place where removal of the power cable is prevented.
1
Ne placez aucun objet à un emplacement gênant le débranchement du câble d'alimentation.
To ensure optimal image quality, it is recommended that you do not use the flat panel sensor
near devices (motor, transformer, switching supply, etc.) that generate electromagnetic noise.
To ensure optimal image quality, it is recommended that you do not place the cables (power
cable, communication cable, etc.) of the equipment near devices (motor, transformer, switching
supply, etc.) that generate electromagnetic noise and their cables.
Do not install the power supply unit in a place where it may be contacted inadvertently. In
addition, take care not to make contact with the power supply unit except when operating the
main switch. If the fan inside the power supply unit malfunctions, the power supply unit may
become hot, causing injury.
Connection Instructions
Make sure that the devices to be connected to the equipment are authorized for connection.
Connect the panel unit DR-ID1270 only to the access point, image processing unit or the
control cabinet.
Precautions on External Network Connection
When a setting of the network to which the equipment is connected has been changed,
check that the change does not affect the system operation and take measures if necessary.
The setting change may include the following:
● Change of connection destination
● Addition of devices
● Removal of devices
● Update of devices
● Upgrade of devices
1-4
DR-ID1270 Operation Manual
CAUTIONS
CAUTIONS
CAUTIONS
CAUTIONS
WARNING
WARNING
CAUTIONS
897N120821E
Advertisement
Table of Contents
