FujiFilm FDR ES DR-ID1270 Operation Manual page 32

■ SE cable
SE cable
2
For other options, refer to the respective operation manuals.
■ SE communication cable
SE communication cable
■ Battery charger (Optional)
Battery charger
Charge status indicator LED
2-4
DR-ID1270 Operation Manual
Name
A cable that connects the flat panel sensor and the power supply unit.
This cable is used for adding the second and subsequent flat panel
sensors,changing over the connection between the flat panel sensors, and
other usages.
Cable length: Approx. 10m (32.8 ft), Approx. 20m (65.6 ft)
Name
A cable used for connecting the flat panel sensor and the optional access point.
This cable is used for wired communication if wireless communication is not
available.
In addition, this cable is used for registering or recognizing the flat panel sensor.
Cable length: Approx. 1m (3.3 ft)
Name
Charges the battery pack for the flat panel sensor. Two packs can be
charged at the same time.
Indicates charge status.
897N120821E
Description
Description
Description