Safety And Other Symbols - FujiFilm FDR ES DR-ID1270 Operation Manual

2.3.2 Safety and Other Symbols

The following safety symbols are used in the labels or on its body.
Symbol Description
/ CE marking
Caution (See "2.3.1 Locations of Labels" (page 2-5).)
OFF (To indicate disconnection from the mains, at least for mains switches or their positions,
and all those cases where safety is involved.)
2
ON (To indicate connection to the mains, at least for mains switches or their positions, and all
those cases where safety is involved.)
Protective earth (ground)
Alternating current
This symbol indicates that the equipment is a Type B Applied Part.
Direct current
Ready (To indicate the machine is ready for operation.)
Electric energy
General mandatory action sign
This symbol indicates that this product is not to be disposed of with your household waste,
according to the WEEE Directive and your national law. This product should be handed over to a
designated collection point.
Improper handling of this type of waste could have a possible negative impact on the
environment and human health due to potentially hazardous substances that are generally
associated with EEE.
At the same time, your cooperation in the correct disposal of this product will contribute to the
effective usage of natural resources.
For more information about waste, please contact our official dealer or FUJIFILM Representative.
Year of manufacture
Caution for local load / Do not drop the flat panel sensor to the user/patient
Entire surface load
This symbol includes RF transmitters or indicates equipment that intentionally applies RF
electromagnetic energy for diagnosis or treatment.
Refer to Instruction Manual/Booklet
No stepping on surface
This symbol indicates that the part is not a battery.
This symbol instructs the user not to disconnect the SE cable during use.
2-8
DR-ID1270 Operation Manual 897N120821E