Notes On Ce Marking; Intended Use - MICRO-EPSILON induSENSOR DTD Operating Instructions Manual

Safety
Protect the sensor cable against damage.
> Destruction of the sensor
> Failure of the measuring device
No sharp or heavy objects should be allowed to affect the cables. Avoid folding the cables.
> Damage or destruction of the cable, failure of the measuring device
1.3
The following apply to the induSENSOR DTD / MSC7401 / 7802 / 7602 series:
- EU Directive 2014/30/EU
- EU Directive 2011/65/EU
Products which carry the CE mark satisfy the requirements of the EU directives cited and the relevant appli-
cable harmonized European standards (EN). The measuring system is designed for use in industrial environ-
ments.
The EU Declaration of Conformity and the technical documentation are available to the responsible authori-
ties according to EU Directives.
1.4
- Das induSENSOR DTD
- The system must only be operated within the limits specified in the technical
- The system must be used in such a way that no persons are endangered or machines and other material
- Take additional precautions for safety and damage prevention in case of safety-related applications.
induSENSOR DTD / MSC7xxx

Notes on CE Marking

Intended Use

/ MSC7401 / 7802 / 7602 measuring system is designed for use in industrial
environments. It is used to control inductive displacement sensors based on the LVDT principle (Linear
Variable Differential Transformer) and for operation with LDR displacement sensors.
goods are damaged in the event of malfunction or total failure of the system.
data, see 2.3.
Page 8