Master Call Routing Mailbox Options - NEC Electra Elite IPK II Programming Manual

Electra Elite IPK II
Level:
IN
Description
Use
assigned as a Call Routing Mailbox in
Input Data
Item
No.
Electra Elite IPK II Programming Manual

47-04 : Master Call Routing Mailbox Options

47-04: Master Call Routing Mailbox Options
01
Dial Action Table
(Dial Action Table)
Use this option to assign the Dial Action Table to
the Call Routing Mailbox. The Dial Action Table
defines the dialing options for the call Routing
Mailbox.
02 Screened Transfer Timeout
(Scrn Trf Timeout)
Use this option to set how long a Screened
Transfer (TRF) from the Automated Attendant
will ring an unanswered extension before
recalling.
This option has a similar function as Customize:
Mailbox Options: Call Routing: [Call Handling]
Options: Delay Rings Before Redirect Transfer in
IPK II In-Mail.
03
Time Limit for Dialing Commands
(Dialing Timeout)
This option determines how long IPK II In-Mail
will wait for an Automated Attendant caller to dial
before routing the call to the Timeout destination.
Be sure your Dial Action Tables have a Timeout
action programmed.
If the caller waits too long to dial:
When the associated Dial Action Table has a
Timeout action programmed, the caller routes to
that destination.
When the associated Dial Action Table does not
have a Timeout action programmed, the
Instruction Menu repeats 3 times and then IPK II
In-Mail hangs up.
Program 47 : In-Mail
47-03-03: Master Mailbox Type
Item
Document Revision 1
to set up a Master Mailbox (01~16)
.
Input Data
1~16 1 (Dial Action Table 1)
(Dial Action Table
1~16)
0~255 seconds 15 (sec)
Entering 0 causes
immediate recall.
0~99 seconds 5 (sec)
Entering 0 causes
the Automated
Attendant to
immediately route
callers to the
Timeout destination
programmed in the
active Dial Action
Table.
Default
2 - 425