Etu Setup - NEC Electra Elite IPK II Programming Manual

Electra Elite IPK II
Program 10 : System Configuration Setup
Level:
IN
Description
Use Program 10-03 : ETU Setup to setup and confirm the Basic Configuration data
for each ETU. When changing a defined terminal type, first set the type to '0' and then
plug the new device in to have the system automatically define it or you may have to
reseat the ETU.


Input Data
Item
No.
Item
No.
Electra Elite IPK II Programming Manual
The items highlighted in
The item numbers indicated below are different when using PCPro/WebPro due to
the window layout of the applications. Refer to the program within the PCPro/
WebPro application to determine the correct item number.
For CNF PKG Setup
Physical Port Number
Item
01 Logical Port Number
For CCISoIP PKG Setup
Physical Port Number
Item
01 Logical Port Number
The start port number of a T1 line is
displayed. 24 logic ports are
automatically assigned to a DTI (T1)
line.
02 T1 Signal Format Selection
03 Clear Channel Selection
gray are read only and cannot be changed.
0 = D4 (12 Multi Frame)
1 = ESF (24 Multi Frame)
Document Revision 1

10-03 : ETU Setup

01~16
Input Data
0~256
01~24
Input Data
0~200
Default
0
Default
0
1
0
2 - 5