Cpuii Network Setup - NEC Electra Elite IPK II Programming Manual

Document Revision 1
Program 10 : System Configuration Setup
Level:
SA
Description
Use Program 10-12 : CPUII Network Setup to setup the IP Address, Subnet-Mask,
and Default Gateway addresses.
Caution! If any of the IPK Address or NIC settings are changed, the system
must be reset in order for the changes to take affect.
Input Data
Item
Item
No.
01 IP Address
02 Subnet Mask
03 Default Gate-
way
2 - 18
Input Data
1.0.0.1 ~ 126.255.255.254
128.1.0.1 ~ 191.254.255.254
192.0.1.1 ~ 223.255.254.254
128.0.0.0 192.0.0.0
240.0.0.0 248.0.0.0
254.0.0.0 255.0.0.0
255.192.0.0 255.224.0.0
255.252.0.0 255.254.0.0
255.255.128.0 255.255.192.0
255.255.248.0 255.255.252.0
255.255.255.0 255.255.255.128
255.255.255.224 255.255.255.240
255.255.255.252 255.255.255.254
1.0.0.1 ~ 126.255.255.254
128.1.0.1 ~ 191.254.255.254
192.0.1.1 ~ 223.255.254.254

10-12 : CPUII Network Setup

Default
172.16.0.10
224.0.0.0 255.255.0.0
252.0.0.0
255.128.0.0
255.248.0.0
255.255.0.0
255.255.224.0
255.255.254.0
255.255.255.192
255.255.255.248
255.255.255.255
0.0.0.0
Program 10 : System Configuration Setup
Electra Elite IPK II
Conditions
The setting of
Subnet-Mask is
invalid when all Host
Address are 0.
If the network
section is:
0,
127
128.0
191.255
192.0.0
223.255.255
The setting of
Subnet-Mask is
invalid.
IP Address for
Router.