Call Routing Mailbox Options - NEC Electra Elite IPK II Programming Manual

Document Revision 1
Level:
IN
Description
Use
Call Routing Mailboxes in
Input Data
Item
No.
01
02
03
2 - 434

47-08: Call Routing Mailbox Options

Item
Dial Action Table
(Dial Action Table)
Use this option to assign the Dial Action Table to the
Call Routing Mailbox. The Dial Action Table defines the
dialing options for the call Routing Mailbox.
Screened Transfer Timeout
(Scrn Trf Timeout)
Use this option to set how long a Screened Transfer
(TRF) from the Automated Attendant will ring an
unanswered extension before recalling.
This option has a similar function as Customize:
Mailbox Options: Call Routing: [Call Handling] Options:
Delay Rings Before Redirect Transfer in Electra Elite
IPK II In-Mail.
Time Limit for Dialing Commands
(Dialing Timeout)
This option determines how long IPK II In-Mail will wait
for an Automated Attendant caller to dial before routing
the call to the Timeout destination.
Be sure your Dial Action Tables have a Timeout action
programmed.
If the caller waits too long to dial:
When the associated Dial Action Table has a Timeout
action programmed, the caller routes to that
destination.
When the associated Dial Action Table does not have
a Timeout action programmed, the Instruction Menu
repeats three times and then IPK II In-Mail hangs up.
Program 47 : In-Mail
47-08 : Call Routing Mailbox Options
to set the options for mailboxes assigned as
47-07-02: Routing Mailbox Type
Electra Elite IPK II
.
Input Data Default
1~16 1 (Dial Action Table 1)
(Dial Action
Table 1~16)
0~255 (sec) 15 (sec)
Entering 0
causes
immediate
recall.
0~99 (sec) 5 (sec)
Entering 0
causes the
Automated
Attendant to
immediately
route callers to
the Timeout
destination
programmed in
the active Dial
Action Table.
Program 47 : In-Mail