Ani/Dnis Service Options - NEC Electra Elite IPK II Programming Manual

Document Revision 1
Level:
IN
Description
Use Program 34-09 : ANI/DNIS Service Options to define the ANI//DNIS service
option setup for E&M Class of Service.
Input Data
Item
No.
01 Receive Format
Use this option to specify the format of the
ANI/DNIS data received from the telco. Make
sure your entry is compatible with the service
the telco provides. (The character
a delimiter.)
02 Delimiter Dial Code
This option defines the character Telco uses
as a delimiter (see entries 1~5 in Item 1
above). Valid entries are 0~9, #, and
03 Route Setup of Receive Dial
This option specifies the source of the data
the system uses to route incoming ANI/DNIS
calls. If option '2' is selected, refer to Program
34-09-04.
2 - 334
Class of Service
Name
indicates
,
.
,
Program 34 : Tie Line Setup

34-09 : ANI/DNIS Service Options

Input Data
0 = Address
1 = A NI
, ,
2 = D NIS
, ,
3 = A NI A ddress
, , ,
4 = A NI D NIS
, , ,
5 = D NIS A NI
, , ,
( = Delimiter Code)
,
1~9, 0, , #
,
0 = Fixed Route
(Item08) (No Routing)
1 = Routes on Received
DNIS or Address Data
2 = Routes on Received
ANI Data
Electra Elite IPK II
01~15
Default
COS 01~14 COS 15
0 0
, ,
0 0
Program 34 : Tie Line Setup
Related
Program
34-09-02
34-09-01
22-09-01
22-11-01
34-09-04
34-09-08