NEC Electra Elite IPK II Programming Manual page 475

Document Revision 1
Input Data (Continued)
Item
No.
02
2 - 440
Item
Override Mailbox Category
(Override MB Ctg)
Use this option to specify the category of the
mailbox to which Automated Attendant calls should
route when you enable Answer Schedule Override.
IPK II In-Mail mailbox categories are Subscriber
Mailbox, Master Mailbox, and Routing Mailbox.
IPK II In-Mail handles the routing according to the
type of mailbox (Subscriber, Call Routing, or
Announcement) within the specified category:
If the Override Mailbox is a Subscriber Mailbox,
H
the outside caller hears the mailbox greeting (if
recorded) and can leave a message.
If the Override Mailbox is an Announcement
H
Mailbox, the outside caller will hear the
recorded announcement. Depending on how
the Announcement Mailbox is programmed,
IPK II In-Mail will then hang up, reroute the call,
or provide additional dialing options.
If the Override Mailbox is a Call Routing
H
Mailbox, the outside caller will hear the
instruction menu and can dial any options
allowed by the associated Dial Action Table.
Override Mailbox Number
(Override MB Num)
Use this option to specify the mailbox to which
Automated Attendant calls should route when you
enable Answer Schedule Override. The mailbox
number you select in this option should match the
mailbox category specified in 47-11-02: Override
Mailbox Category above.
Electra Elite IPK II
Input Data
0 (Undefined) 0
(Undefined)
1 (Subscriber
Mailbox - STA)
2 (Master Mailbox)
3 (Routing Mailbox)
Digits No Entry
(3 maximum, using
0~9)
Program 47 : In-Mail
Default